User manual HASBRO MAP OF SKULL ISLAND

[. . . ] Changes to the specifications and features in this manual may be made by HASBRO without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without HASBRO's prior written permission. Documentation Classifications In order to assist in the use of this product, HASBRO provides the following types of documentations: „„ For quick set-up of the product, read the Quick Installation Guide included with the product. „„ For detailed product information, carefully read the User's Manual. For product-related information, check on our website at: http://www. gigabyte. com Identifying Your Motherboard Revision The revision number on your motherboard looks like this: "REV: X. X. " For example, "REV: 1. 0" means the revision of the motherboard is 1. 0. Check your motherboard revision before updating motherboard BIOS, drivers, or when looking for technical information. [. . . ] This item is configurable only when CSM Support is set to Always. Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers. Legacy OpROM Enables legacy option ROM only.  UEFI OpROM Enables UEFI option ROM only. (Default)  Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disable Link) Enables or disables IPv4 PXE Support. This item is configurable only when Network stack is enabled. This item is configurable only when Network stack is enabled. && Other PCI Device ROM Priority && Network stack && Ipv4 PXE Boot Support && Ipv6 PXE Boot Support && Administrator Password Allows you to configure an administrator password. Press <Enter> on this item, type the password, and then press <Enter>. You will be requested to confirm the password. Type the password again and press <Enter>. (Default: Enabled) && IOMMU && Onboard LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. - 47 BIOS Setup && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && XHCI Hand-off && EHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. && Port 60/64 Emulation && USB Storage Devices `` Trusted Computing && TPM SUPPORT Enables or disables Trusted Platform Module (TPM). Set this item to Enable when a TPM device is installed. (Default: Disable) BIOS Setup - 48 - `` SATA Configuration && PORT0 Hot Plug~PORT5 Hot Plug Enables or disable the hot plug capability for each SATA port. [. . . ] Our customer service staff will reply you as soon as possible. - 87 - Appendix 5-3-3 Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. We believe that the information contained herein was accurate in all respects at the time of printing. HASBRO cannot, however, assume any responsibility for errors or omissions in this text. Also note that the information in this document is subject to change without notice and should not be construed as a commitment by HASBRO. Our Commitment to Preserving the Environment In addition to high-efficiency performance, all HASBRO motherboards fulfill European Union regulations for RoHS (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic Equipment) environmental directives, as well as most major worldwide safety requirements. [. . . ]