User manual HASBRO MARVEL SUPER HERO SQUAD GAMMA LAB ADVENTURE

[. . . ] Changes to the specifications and features in this manual may be made by HASBRO without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without HASBRO's prior written permission. „„ In order to assist in the use of this product, carefully read the User's Manual. „„ For product-related information, check on our website at: http://www. gigabyte. com Identifying Your Motherboard Revision The revision number on your motherboard looks like this: "REV: X. X. " For example, "REV: 1. 0" means the revision of the motherboard is 1. 0. [. . . ] With virtualization, one computer system can function as multiple virtual systems. (Default: Enabled) && C6 Mode  Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the CPU core frequency will be reduced during system halt state to decrease power consumption. The C6 state is a more enhanced power-saving state than C1. (Default: Enabled) && C1E SUPPORT Allows you to determine whether to let the CPU enter C1 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. (Default: Disabled) This item is present only when you install a CPU that supports this feature. - 27 - (Note) && AMD Memory Profile (A. M. P. ) (Note) Allows the BIOS to read the SPD data on AMP memory module(s) to enhance memory performance when enabled. (Default) Profile1  Uses Profile 1 settings. Profile2 (Note) Uses Profile 2 settings.  Allows you to set the system memory multiplier. Normal   Allows the CPU fan to run at different speeds according to the CPU temperature. You can adjust the fan speed with EasyTune based on your system requirements. (Default) Silent  Allows the CPU fan to run at slow speeds. Manual Allows you to control the CPU fan speed under the Slope PWM item.  Disabled Allows the CPU fan to run at full speeds.  Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is set to Manual. Options are: 0. 75 PWM value /oC ~ 2. 50 PWM value /oC. && CPU Fan Speed Control && Slope PWM && System Fan Speed Control Allows you to determine whether to enable the system fan speed control function and adjust the fan speed. Normal   Allows the system fan to run at different speeds according to the system temperature. You can adjust the fan speed with EasyTune based on your system requirements. (Default) Silent  Allows the system fan to run at slow speeds. [. . . ] Press <Ctrl>+<Y> to set the capacity of the RAID array or press other keys to set the array to its maximum capacity. Press Ctrl-Y to Modify Array Capacity or press any other key to use maximum capacity. . . Figure 3 - 42 - 8. After the creation is complete, the screen will return to LD View Menu where you will see the newlycreated array. 9. Press <Esc> to return to Main Menu and press <Esc> again if you want to exit the RAID BIOS utility. Making a SATA RAID/AHCI Driver Diskette Before installing Windows XP, connect a USB floppy disk drive to your computer first because you need to install the SATA RAID/AHCI driver from a floppy disk that contains the driver during the OS installation. To copy the RAID/AHCI driver for Windows XP, copy all files in the \BootDrv\Hxp folder in the motherboard driver disk to your floppy disk. Installing the SATA RAID/AHCI Driver and Operating System A. Installing Windows XP Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or RAID driver. " Insert the floppy disk containing the SATA RAID/AHCI driver. [. . . ]