User manual HASBRO MICKEY AND FRIENDS SLIDE

[. . . ] For details, please visit http://mp3licensing. com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. TINSZA966AWZZ Printed in Malaysia 11F R AS 1 MICKEY AND FRIENDS SLIDE_USA_EN_cover. indd 1 4/15/2011 4:23:32 PM SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] If you make a mistake, the programed tracks can be cleared by pressing the CLEAR button. 5 Press the (CD/USB ) button to start playback. Procedure to playback MP3/WMA disc with folder mode on To play back CD-R/RW. 1 Press the CD button, and load an MP3/WMA disc. Press the FOLDER button and disc info will be displayed. MP3 indicator Disc WMA indicator Name TOTAL indicator Total number of folder Total number of files 2 Press the FOLDER button, and press the PRESET ( or ) button to select desired playback folder. (Folder mode on) FOLDER indicator FOLDER number First track number in the folder Select desired file to be played back by pressing the or button. Playback will start and Press the file name will be displayed. Title, Artist and Album name are displayed if they are recorded on the disc. In case of playback with the folder mode on, press the PRESET ( or ) button, and the folder can be selected even though it is in playback/pause mode. It will continue playback/pause mode in the 1st track of the selected folder. Display content can be changed by pressing the DISPLAY button. File name display Title display Programed play (MP3/WMA) 1 While in the stop mode, press the MEMORY button to enter the programing save mode. 2 Press the PRESET ( or ) button on the remote control to select the desired folder. 3 4 Then press the or button on the remote control to select the desired tracks. 3 Press the MEMORY button to save the folder and track number. 4 Repeat steps 2 - 3 for other folder/tracks. Display content can be changed by pressing the DISPLAY button. USB cable is not recommended for use in this audio system to connect to USB memory device. Use of the USB cable will affect the performance of this audio system. This USB memory cannot be operated via USB hub. The USB terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device. External HDD-storage cannot be played back via USB terminal. If the data inside the USB memory is large, it may take longer time for the data to be read. This product can play WMA and MP3 files. It will automatically detect the file type being played. If unplayable file is played on this product, “NO SUPPORT” is indicated and the file will be automatically skipped. If abnormal indications appear on the display due to the unspecified file, turn off the unit and then turn it on again. This product relates to USB mass storage devices and MP3 players. [. . . ] Possible cause Is there any MP3/WMA file available?Is Variable Bitrate file being played back?Is the File Name written in Chinese or Japanese characters?Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD program. Playback does not start. [. . . ]