User manual HASBRO MICKEY DOMINOES

[. . . ] For details, please visit http://mp3licensing. com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. TINSZA643AWZZ Printed in Malaysia 10B R M 1 09/12/31 MICKEY DOMINOES (SEC-LAG) Front. fm For U. S. customer only CONSUMER LIMITED WARRANTY HASBRO ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. [. . . ] Should this happen, turn off the unit and then turn it on again. ● The USB port is only intended for direct connection to a USB memory device without any cable. ● Playback order for MP3 files may differ depending on the writing software used during file download. ● Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps. ● Playlists are not supported on this unit. ● This unit can display Folder Name or File Name up to 32 characters. ● Folders with non playable files are also counted. ● The display playback time may not be displayed correctly when playing back a variable bitrate file. ● The ID3TAG information supported are TITLE, ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the DISPLAY button during file playback or pause mode. ● WMA meta tag also supports title, artist and album name which are recorded in WMA files. ● To stop the auto tuning, press the TUNING ( or ) button again. To receive an FM stereo transmission: ● Press the FUNCTION button on main unit or TUNER (BAND) button on remote control repeatedly to select stereo mode and “ST” indicator will be displayed. “ ” will appear when an FM broadcast is in stereo. ● If the FM reception is weak, press the TUNER (BAND) button to extinguish the “ST” indicator. The reception changes to monaural, and the sound becomes clearer. or ) button for more than 0. 5 seconds. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each. ) button again when the 2 Press the PRESET ( To erase entire preset memory 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 While pressing down the FUNCTION button, press the POWER ON/STAND-BY button until “TUNER CLEAR” appears. POWER ON/STAND-BY E-9 09/12/31 MICKEY DOMINOES (SEC-LAG) EN. fm Listening to a cassette tape Note: Tape recording function is not available in this unit. Before playback: ● For playback, use normal or low-noise tapes for the best sound. (Metal or CrO2 tapes are not recommended. ) ● Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. ● Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. Tape playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the FUNCTION button on main unit repeatedly or TAPE button on remote control to select TAPE function. 3 Open the cassette door by pushing the area marked “ PUSH OPEN”. AUDIO IN PHONES VOL VOL PUSH OPEN PUSH OPEN 4 Load a cassette into the cassette compartment. MINI COMPONENT SYSTEM CD-DH899 ENT SYSTEM CD-DH899 MINI COMPON POWER ON/STAND-BY FUNCTION POWER ON/STAND-BY POWER ON/STAND-BY FUNCTION VOL OPEN/ CLOSE VOL AUDIO IN PHONES PUSH OPEN AUDIO IN 5 Press the / (TAPE ) button to start playback. PHONES Various tape functions Function Tape playback Main unit Remote control Operation Press in the stop mode. Stop CD USB TAPE ____ Fast forward/ Fast rewind Press in the playback, fast forward or fast rewind mode. [. . . ] ● Using 3rd generation iPod. Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. ● Do not write on either side of the disc, particularly the non-label side from which signals are read. ● Keep your discs away from direct sunlight, heat and excessive moisture. [. . . ]