User manual HASBRO MICKEY HOPPIN CHECKERS

[. . . ] Touch & Type Status bar ( page 21) Touchscreen/display Icons ( page 64) show the telephone's current settings and operating status. the status page ( V Idle display ( page 17) or menu page ( page 18) Apr Handset keys Side keys Set the volume during a call 26 Thu ? c Talk key Dial displayed number, accept call, ?switch between earpiece and handsfree mode, ?Press and hold: start dialling v Menu key Open the main menu/return to the idle display page 18) ( a End call/end key Press briefly: end call/paging call, reject internal call, return to idle status? [. . . ] Successful registration is shown on the display. Adjust the handset's setting using the Settings menu item ( page 10). Please note u If six handsets are already registered with the base (all internal numbers occupied) then the most recently registered handset (e. g. , INT 6) is replaced by the new handset. If this attempt is not successful, e. g. , because this handset does not have a connection to the base, the message No free internal number is displayed. ?In this case, de-register another handset that is no longer required and repeat the registration procedure. u You should start the registration procedure for other Gigaset handsets and handsets of other GAP-enabled devices in accordance with the respective operating instructions. Using the handset on multiple bases Your handset can be registered on up to four bases. The active base is the last one your handset was registered with. The other bases are stored in the list of available bases. You can change the allocation to a base manually at any time. Alternatively, you can set the handset so that it selects the base with the best reception (Best Base) as soon as the connection to the current base is lost. Menu key v Settings menu page HS + Base Connect to Base?Touch the selection icon for the desired base or touch Best Base (=selected) Template CES 131x195 1col, Version 1, 12. 03. 2012 Changing a base name or deleting a base Menu key v Settings menu page HS + Base Connect to Base?Call waiting is not displayed. Ending listening in Press a. All participants hear a signal tone. 46 Gigaset S820/S820A / GBR / A31008-M2404-L101-1-7619 / Bluetooth. fm / 9/17/12 Bluetooth devices Bluetooth devices You can register up to five data devices (PC, PDA, mobile phones) and one Bluetooth headset. You must activate Bluetooth on the handset, ensure the devices are visible if necessary and then register the handset. You can exchange contacts entries using the data devices and load ringtones and pictures to the handset using the Gigaset QuickSync software ( page 61). u A headset must have the headset or handsfree profile. u Establishing a connection to a headset can take up to 5seconds. Please note Activating/deactivating Bluetooth mode You can activate/deactivate Bluetooth mode using the status page ( page 21) or via Menu key v Settings menu page Bluetooth Activation on/off If Bluetooth is activated: u is displayed in the status bar ( page 64). u The handset can communicate with all devices in the Known Devices list. u The handset is visible to Bluetooth devices within its range. u If the known devices include a headset, the handset establishes a connection to this headset. ? Bluetooth Activation Search for Devices Known Devices Name on James?Borneo L Finding and registering (trusting) Bluetooth devices The distance between the handset and the activated Bluetooth device should be a maximum of 10m. u If you register a headset, any previously registered headset is overwritten. [. . . ] 46 External calls time control for ringtone . 62 Template CES 131x195 1col, Version 1, 12. 03. 2012 I Icons displaying new messages. 72 Gigaset S820/S820A / GBR / A31008-M2404-L101-1-7619 / S820_S820A-LUGSIX. fm / 9/17/12 Index Installation wizard . 66 Message LED activating/deactivating . [. . . ]