User manual HASBRO MICKEY LOOK AND FIND SCROLL AROUND THE WORLD GAME

[. . . ] 32 Synchronising with your PC (Gigaset QuickSync) . 36 Service (Customer Care) - United Kingdom and Ireland . 38 Customer service & product warranty ?49 Template CES 131x195 1col, Version 1, 12. 03. 2012 2 Gigaset S820H / AUS_UK_IRL en / A31008-M2454-L101-1-7619 / security. fm / 8/30/12 Safety precautions Safety precautions Warning Read the safety precautions and the user guide before use. [. . . ] u If you register a headset, any previously registered headset is overwritten. u If a headset is already registered to another device, please deactivate this connection before starting the registration process. Please note Starting the search Start the search via Search for Devices in the Bluetooth sub-menu The handset searches for Bluetooth devices within its range. Located devices are added to the Devices Found list. Trusting the device - adding the device to the known devices list Template CES 131x195 1col, Version 1, 12. 03. 2012 Select the device in the Devices Found list Trust Device If necessary, enter the PIN of the device you want to pair and touch to confirm u PIN for a data device: enter any PIN on the handset and then also on the data device. PIN for a headset: 0000 is generally preset. Therefore, you only need to enter the PIN in exceptional cases. u If Known Devices already contains six entries, the last entry is overwritten. Exception: a headset only overwrites a headset. to exit the Devices Found list or touch Stop Search. Ending the search 24 Gigaset S820H / AUS_UK_IRL en / A31008-M2454-L101-1-7619 / make_familiar. fm / 9/4/12 Contacts (address book) Editing the list of paired (trusted) devices A next to the device name in the list indicates a headset and = indicates a data device. Open the Known Devices list Select device View device information Touch to delete the device Touch Yes to confirm Or: Touch the Name field Change the name and touch to confirm. Rejecting/accepting an unregistered Bluetooth device If an unknown Bluetooth device tries to establish a connection, you will be asked to enter the device's PIN (bonding). Or: Accept: enter device PIN Press to confirm. Yes: add to the Known Devices list or No: use the device temporarily Menu key v Menu page Settings Bluetooth Own Device (If Bluetooth is deactivated, it will be activated. ) Touch the name If necessary, use to delete the previous name Enter new name Touch to confirm. Changing the handset's Bluetooth name Continuing a handset call on the Bluetooth headset Prerequisite: Bluetooth is activated; the Bluetooth headset and the handset are connected. You have the following options: u Scroll to the name you are searching for. u Enter the first letter of the name via the keypad. Transferring an entry/contacts to another handset Prerequisites: u The sending and receiving handsets must both be registered to the same base. u The other handset and the base can send and receive contacts entries. u An external call will interrupt the transfer. u Caller pictures and sounds are not transferred. For a birthday, only the date is transferred. u When transferring an entry between two vCard handsets: If the recipient does not yet have an entry with that name, a new entry is created. If there is already an entry with that name, this entry is expanded with the new numbers. Where there are more than eight numbers in total, a second entry is created with the same name. u If the recipient is not a vCard handset: an entry is created and sent for each number. u Your handset receives entries from a non-vCard handset: entries with numbers already saved are rejected; otherwise a new entry is created. [. . . ] 5 Place the device in a dry, warm place for at least 72 hours (not in a microwave, oven etc. ) with the battery compartment open and the keypad facing down (if applicable). 6 Do not switch on the device again until it is completely dry. When it has fully dried out, you will normally be able to use it again. 46 Gigaset S820H / AUS_UK_IRL en / A31008-M2454-L101-1-7619 / appendix. fm / 9/4/12 Appendix Specifications Battery Technology: Voltage: Capacity: 2 x AA NiMH 1. 2 V 1300 mAh Handset operating times/charging times The operating time of your Gigaset depends on the capacity and age of the battery and the way it is used. (All times are maximum possible times. ) Standby time (hours) * Standby time in Eco Talk time (hours) Operating time for 1. 5hours of calls per day (hours) * Operating time in Eco mode+ for 1. 5hours of calls perday (hours) * Charging time in charger (hours) * Without display backlight 250 180 20 165 105 14, 5 mode+ (hours) * Information about the USB port u The handset?s battery is charged using a USB connection with a power supply of 500 mA. [. . . ]