User manual HASBRO MIGHTY MORPHIN POWER RANGERS ELECTRONIC LCD GAME

[. . . ] KG (SHC), die ihrerseits das Gigaset-Geschft der Siemens AG fortfhrte. Etwaige Erklrungen der Siemens AG oder der SHC in den Bedienungsanleitungen sind daher als Erklrungen der Gigaset Communications GmbH zu verstehen. Wir wnschen Ihnen viel Freude mit Ihrem Gigaset. Chre Cliente, Cher Client, la socit Gigaset Communications GmbH succde en droit Siemens Home and Office Communication Devices GmbH & Co. [. . . ] For more detailed explanations of the individual components/terms, see the glossary (page 134). The base station phone and router are set by default so that there is a connection between them. You only have to change the IP configuration for your phone in exceptional circumstances, e. g. if you have configured port forwarding to the phone for the router, or if you had to deactivate the router's DHCP server. In this case you need to assign the phone a fixed IP address. Assigning the IP address Open the following Web page: Settings IP Configuration. In the Address Assignment area, select the IP address type. Select Obtained automatically if you want your phone to be assigned a dynamic IP address by a DHCP server in your local network. No further settings are necessary for the local network. Select Static if you would like to set up a static IP address for your phone. A fixed IP address makes sense, for example, if port forwarding is set up on the router for the phone (page 75). The following fields are displayed when you select IP address type = Static: IP address Enter an IP address for your phone. This IP address allows it to be reached by other subscribers in your local network (e. g. The IP address must be from the address block for private use that is used in the router. To establish a connection, the public IP address or the DNS name of the base station router and, where applicable, the port number on the base station (page 77) router must be indicated in the Web browser of the remote PC. Open the following Web page: Settings IP Configuration. In the Remote Management area, activate the Yes option to permit access from other net- Version 2, 21. 12. 2006 87 CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / web_server. fm / 02. 03. 2007 Configuring telephone connections Configuring telephone connections You can configure up to six VoIP phone numbers on your phone. You need to set up a VoIP account with a VoIP provider for each VoIP phone number. You must save the access data for each account and for the relevant VoIP provider in the phone. You can assign a name to every connection. To configure the connections: Open the following Web page: Settings Telephony Connections. A list (see Figure 3) will be shown with all possible connections that you can configure, or have already configured, for your phone. Figure 3 List of possible connections The list will show the following: Name Name of the connection. The name that you have defined for the connection is displayed (page 89) or the default name (IP1 to IP6). This name is shown, for example, on the display if a call is received for this phone number (page 28). Status The status of the connection will be shown for VoIP connections: registered The connection is activated. The phone has been successfully registered. [. . . ] 56 Point-to-Point Protocol over Ethernet, see PPPoE O On/Off key . 96 Operation (preparing to use the phone) . 97 151 Version 2, 21. 12. 2006 CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / CE450IP_R_laenderSIX. fm / 02. 03. 2007 Index Point-to-Point Tunnelling Protocol, see PPTP Port . 108 Restoring to factory settings base station . [. . . ]