User manual HASBRO MILTON

[. . . ] In Eco Mode your Gigaset is radiation-free while in idle status – and it saves energy. If you use your Gigaset E500H in conjunction with an E500A base, you can use the emergency function. See the user guide for your E500A base for further information. This user guide contains detailed step-by-step instructions to help you quickly become familiar with your phone. [. . . ] (See "Setting up an internal call", page 34) Label with Dir. Number Label the key with a number from the directory. Select a number and press §OK§. Changing the function of the direct dialling keys §Menu§ ¤ q Settings ¤ §OK§ ¤ q Direct Dial Keys ¤ §OK§ ¤ q Select direct dialling key (I to IV) Assigning a function to direct dialling keys Prerequisite: The direct dialling key in question has not already been assigned a function. ¤ In idle status, press the direct dialling key (; to >) on the handset to which you wish to assign a function. Select the relevant function using q: Label with Ext. Enter an external phone number directly. ~ Enter the number and press §OK§. ~ Enter the name and press §OK§. The current labelling is displayed after the key number, e. g. , I: <no entry> i. e. , the ; key is not currently labelled or IV: Call INT i. e. , the > key is labelled with the internal call function. Select a function with §Menu§ ¤ q. Not all functions may be available, depending on the current labelling. Delete Entry Delete current key labelling. If one of the numbers is in the directory, the corresponding name will be displayed. Dialling from the redial list §Redial§ q c Press the display key. The number is dialled. Managing entries in the redial list Press the display key. The following functions can be selected with q: Use Number (as in the directory, page 32) q Copy to Directory (as in the directory, page 32) Delete Entry (as in the directory, page 32) Delete List (as in the directory, page 32) §Redial§ Accepting a waiting call If you receive an external call while conducting an internal call, you will hear the call waiting tone (short beep). With Calling Line Identification, the caller's number will appear in the display. ¤ Press the end call key a on the handset to end the internal call. ¤ Press the talk key c to accept the external call. Answering machine list (dependent on base) The answering machine list contains all the calls recorded by the answering machine. You can use the list to listen to messages on the answering machine. 35 Gigaset E500H / IM1 en / A31008-M2256-R101-2-4N19 / telephony. fm / 02. 03. 2011 Using the directory, direct dialling keys and lists Network mailbox list You can use this list to listen to messages on the network mailbox (¢ page 39). List entry Example of a list entry: t x Back Missed calls list Prerequisite: CLIP (¢ page 28) Your telephone saves the last 20 missed calls. New Call 12345678 Menu Opening the missed calls list u To open the list from the menu: §Menu§ ¤ q Missed Calls ¤ §OK§ u If there are new entries in the list, you can go to the list by pressing: ’ ¤ q Missed Calls: (see also ¢ page 37) The list is displayed as follows: t Missed Calls: 01+02 Back OK Number of new messages + number of old, read messages. Press the display key to open the list. The last missed call is displayed as the first entry. §OK§ u Status of entry New Call: New missed call. u Number of caller You can add the number of the caller to the directory (¢ page 32). Use the §Menu§ display key to select the following options: Delete Entry Delete selected entry. [. . . ] 550 700 800 1000 180 210 240 295 15 17 20 25 General specifications DECT standard GAP standard No. of channels Supported Supported 60 duplex channels Radio frequency range 1880–1900 MHz Duplex method Time multiplex, 10 ms frame length Pulse repetition rate 100 Hz Pulse transmission length Channel grid Bit rate Modulation Transmission power 370 μs 1728 kHz 1152 kbit/s GFSK 10 mW average power per channel, 250 mW pulse power Up to 300 m outdoors, up to 50 m indoors +5°C to +45°C, 20% to 75% relative humidity DTMF (tone dialling)/PD (pulse dialling) Standby time (hours) Calling time (hours) Operating time for 1. 5 hrs of calls per day (hours) - Without Eco Mode+ - With Eco Mode+ Charging time in base (hours) Charging time in charger (hours) Language code 32 kbit/s 105 120 140 170 65 70 85 105 5. 5 5 6. 5 6 7. 5 6. 5 9 8. 5 Range Due to the constant progression in battery development, the list of recommended batteries in the FAQ section of the Gigaset Customer Care pages is regularly updated: www. gigaset. com/service Environmental conditions for operation Dialling mode 51 Gigaset E500H / IM1 en / A31008-M2256-R101-2-4N19 / appendix. fm / 02. 03. 2011 Appendix Writing and editing names The following rules apply when writing names: u Each key between Q and O is assigned several letters and characters. u Characters are inserted at the cursor position. u Press the display key §Delete§ to delete the character to the left of the cursor. [. . . ]