User manual HASBRO MIRABELLE

[. . . ] with the special "touch" Congratulations on your purchase of the first Gigaset with touchscreen. This phone sets new standards with its high-quality genuine metal frame, 3. 2" TFT colour touchscreen and excellent sound quality and, last but by no means least, its impressive interior qualities. Your Gigaset can do a lot more than just make calls: Set up one of the three home screens according to your needs Bring together the important functions and numbers, which you can start up or call directly from idle status with a single "touch" ( page 72). Give each caller his own personal portrait ( page 46), look at your personal pictures as a screensaver slide show ( page 75) and load the ringtones you want onto your handset ( page 87). Customise Make sure your phone is always up-to-date Use the base's Ethernet connection to download new and expanded versions of the base firmware directly from the Internet ( page 85). [. . . ] A paging call is only signalled visually. If you accept an incoming call, the room monitor mode is suspended for the duration of the call, but the function remains activated. The room monitor is not deactivated by switching the handset off and on again. u Please check the functionality when you switch on. For example, test its Warning sensitivity. Check the connection if you are diverting the room monitor to an external number. Please note that the room monitor is only activated 20 seconds after being switched on. u Activating the function reduces the operating time of your handset. If necessary, place the handset in the charger. u The handset should be positioned 1 to 2 meters away from the baby. The microphone must be pointed towards the baby. u The connection used by the room monitor must not be blocked by an activated answering machine. u The appointment/anniversary was signalled during a phone call. u The handset was deactivated at the time of the appointment/anniversary. You can open the Reminders / Events list via the message page in the idle display. The following icon is displayed for the list. 10 2 Number of new entries Number of old entries Touch the icon to open the list. If 20 entries are saved in the list, the oldest entry is deleted at the time of the next unacknowledged appointment reminder. Please note To delete the entire contents of the list, see page 44. Setting a reminder call In the Settings menu ( page 25), touch [ Audio Settings]. Adjust the volume with / or activate the crescendo call with the button Touch the ?next to Reminder Signal. Version 4. 1, 21. 11. 2007 66 Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / applications. fm / 08. 12. 2011 Setting the alarm Setting the alarm Prerequisite: The date and time have already been set ( page 17). You can activate/deactivate and set the alarm using the status page ( page 24) or as follows: In the Applications menu ( page 25), touch [ Alarm]. Activate/deactivate the alarm with the button at the top of the display. Touch [ N Edit] to change the settings for the alarm. Set the hour and minute for the wake-up time (time setting page 17). [. . . ] 36 36 36 70 39 71 56 70 56 40 42 56 Version 4. 1, 21. 11. 2007 102 Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / SL910A-LUGSIX. fm / 08. 12. 2011 Index Call swapping . 39 CD, see Call divert Changing character set . 77 Deleting announcement for answering machine . 29 Displaying missed appointments/anniversaries . [. . . ]