User manual HASBRO MONOPOLY MICHAEL GRAVES

[. . . ] Locating a handset ("Paging") . Activating/deactivation suppression of the first ringtone . Restoring the handset default settings . 17 18 18 19 19 19 19 20 20 20 20 21 21 Handset settings . [. . . ] If one of the numbers is in the directory, then the corresponding name will be displayed. Dialling from the last number redial list q c §Redial§ Storing/changing direct dialling keys You can assign external phone numbers and the internal call function to the direct dialling keys. §Menu§ ¢ Settings ¢ §OK§ ¢ Direct Diall. Keys ¢ §OK§ ¢ I: <no entry> ¢ q Select direct dialling key (I to IV) Press the display key. The number is dialled. Managing entries in the last number redial list Press the display key. The following functions can be selected with q: Use Number (as in the directory, page 13) q Copy to Directory (as in the directory, page 13) Delete Entry (as in the directory, page 13) Delete List (as in the directory, page 13) §Redial§ Entering/changing an entry You have selected a direct dialling key. §Menu§ ¢ Edit Entry ¢ §OK§ ~ Enter or edit the number if required and press §OK§. ~ Enter or edit the name if required and press §OK§. 14 Using the directory, direct dialling keys and lists Opening the message list with the display key You can use the display key ` to open the the network mailbox (if your network provider supports this function and the network mailbox is set up for speed dialling, page 17) and the calls list. An advisory tone sounds as soon as a new entry appears in a list. If you press the display key `, you will see all the lists that contain new messages. If only one list contains new messages, this list will be opened automatically. Press any key and the message advising of new messages is no longer shown on the display. 16 ¢ §OK§ a Select entry and press §OK§. Press and hold (idle status). Temporarily cancelling preselection c (press and hold) ¢ §Menu§ ¢ Preselect off ¢ §OK§ Permanently deactivating preselection §Delete§ and press §OK§. ¤ Delete the preselection number with Using the network mailbox Using the network mailbox The network mailbox is your network provider's answering machine. You cannot use the network mailbox unless you have applied to your network provider. Using several handsets Registering handsets You can register up to four handsets on your base station. Automatic registration Gigaset E36 on Gigaset E360, see page 6. Using the network mailbox for setting speed dialling With speed dialling, you can direct dial the network mailbox. The integrated answering machine is preconfigured for speed dialling. You only have to enter the number. Manual registration Gigaset E36 on Gigaset E360. You must activate manual registration of the handset on both the handset and the base station. After it has registered, the handset returns to idle status. If several handsets are registered on the base, the internal number is shown in the display after registration, e. g. The registration process is cancelled after 60 seconds. If the handset has not registered within this time, repeat the process. Configuring the network mailbox for speed dialling and entering the network mailbox number §Menu§ ¢ Voice Mail ¢ §OK§ ¢ Set Key 1 ¢ §OK§ ¢ Network Mailbox ¢ §OK§ ( = on) ¢ Enter the number of the network mailbox ¢ §OK§ On the handset §Menu§ This setting is now valid for all registered handsets. Calling the network mailbox 1 Press and hold. This connects you directly to the network mailbox. [. . . ] The display briefly shows whether uppercase or lowercase letters or digits are selected when you switch from one mode to the next: The bottom text line displays "abc > Abc", "Abc -> 123" or "123 -> abc". General specifications DECT standard GAP standard Range is supported is supported up to 300 m outdoors, up to 50 m indoors Base station power 230 V ~/50 Hz supply Environmental conditions for operation +5 °C to +45 °C; 20 % to 75 % relative humidity Order of directory entries The directory entries are usually sorted in alphabetical order. Other characters To get round the alphabetical order of the entries, insert a space or a digit in front of the name. These entries will then move to the beginning of the directory. Names that you have preceded with an asterisk will move to the end of the directory. Writing and editing a text message The following rules apply when writing a text message: u The cursor is controlled with t s. [. . . ]