User manual HASBRO MONOPOLY STAR WARS ORIGINAL TRILOGY EDITION

[. . . ] 5 Skip back to beginning of message (press once) or to previous message (press twice). 7 Adjust volume during message playback: = quieter; = louder. While an external call is being signalled: adjust ringer tone volume. Gigaset S885 base station Please note: u If the answering machine is being oper- LED ated from a handset or if it is recording a message, it cannot be operated from the base station. u If the LED flashes although the answering machine is switched off, it means that there is still at least one new message that has not been played back yet. [. . . ] When the room monitor is activated, incoming calls to the handset are indicated without a ringer tone and are only shown on the screen. The display and keypad are not illuminated and advisory tones are also turned off. If you accept an incoming call, the room monitor mode is suspended for the duration of the call, but the function remains activated. If you deactivate then reactivate the handset, the room monitor mode remains activated. Changing a handset's internal number A handset is automatically assigned the lowest free number on registration. If all slots are occupied, number 4 is overwritten if this handset is in idle status. You can change the internal number of all registered handsets (14). The handset's old number is overwritten. Save Press the display key to save the input. You will hear the error tone (descending tone sequence) if you assign an internal number twice. Repeat the procedure with a free number. Warning! You should always check the operation of the room monitor before use. Check the connection if you are diverting the room monitor to an external number. If you accidentally choose a language you do not understand: v54 Press keys in sequence. s Select the correct language and press OK. 28 Setting the handset Setting the display You have a choice of four colour schemes and several different contrasts. v Display Colour Scheme Select and press OK. s Select a colour scheme and press OK ( = current colour). a Press and hold (idle status). Setting the display backlight Depending on whether or not the handset is in the charging cradle, you can activate or deactivate the backlight. If the base station is turned on, the display is permanently dimmed. v Display Backlight The current setting is displayed. Change multiple line input: In Charger Select On or Off. Without Charger Select On or Off. Please note: With the On setting, the standby time of the handset can be significantly reduced. Save Setting the screen picture You can display a screen picture (digital clock) when the handset is in idle status. This will replace the idle status display. [. . . ] The corresponding digit is shown at the end of the edit line. Each time the hash key is pressed the value increases by 1. u To be able to enter symbols and special characters, press the Q key. You can then select and enter the required symbol in the selection line as described above. selection line 45 Accessories Accessories Gigaset Handsets Upgrade your Gigaset to a cordless PABX: Gigaset S88H handset u u u u u u u Illuminated graphical colour display (65k colours) Illuminated keypad Handsfree talking Polyphonic ringer tones Directory for around 150 entries Headset socket Room monitor www. gigaset. com/gigasetS88H 46 Wall-mounting the base station Wall-mounting the base station S880: 41. 1 mm S885: 42. 0 mm S880: approx. [. . . ]