User manual HASBRO MONSTER MASH 1994

[. . . ] KG (SHC), die ihrerseits das Gigaset-Geschäft der Siemens AG fortführte. Etwaige Erklärungen der Siemens AG oder der SHC in den Bedienungsanleitungen sind daher als Erklärungen der Gigaset Communications GmbH zu verstehen. Wir wünschen Ihnen viel Freude mit Ihrem Gigaset. Chère Cliente, Cher Client, la société Gigaset Communications GmbH succède en droit à Siemens Home and Office Communication Devices GmbH & Co. [. . . ] 3 Register/paging key W Place the battery leads in the cable guides so that the battery cover cannot catch on the leads and damage them when it is closed. Only insert the recommended rechargeable battery pack, i. e. never use a normal battery pack as this could damage your health and cause injury. Never use non-Siemens battery chargers as this could damage the battery pack. Only place the handset in the charging cradle that is intended for it. Step 3: Charging the battery pack Charging the battery pack To charge the battery pack, leave the handset in the charging cradle for approx. The charge status of the battery pack is correctly displayed only after uninterrupted charging/discharging. You should not therefore interrupt the charging process. Charging is electronically controlled to prevent overcharging. The battery pack heats up during charging; this is normal and not dangerous. After a time the charge capacity of the pack will decrease for technical reasons. You must set the date and time to ensure that the times of calls are logged correctly (page 11). Calls list: The number of the last 30 missed calls are stored. When the phone is in idle status, new missed calls are indicated by a flashing Û . Example of how the calls list appears: CALLS 02/08 Number of old, read entries Number of new entries ¢ The answering machine switches itself off when its memory is full. Delete old messages (page 5). ¢ ¢ ¢ ANS Recording your own announcement MENU MENT For the answering machine list, see page 5. Opening the calls list and selecting an entry You can view entries you have already read. You hear a recording prompt and then the ready tone (short beep). Press OK to confirm or a to reject your recording. ¢ ANS MACHINE ¢ OK ¢ ANNOUNCE¢ OK ¢ REC ANC ¢ OK. Û s CALLS s Open calls list. OK Confirm. Select entry. Recording is automatically terminated: If you exceed the maximum recording time of 170 s. If you pause for more than 2 seconds while recording. 5 Checking an announcement or deleting it MENU ¢ ANS MACHINE ¢ OK ¢ ANNOUNCEMENT ¢ OK PLAY ANC DEL ANC Taking a call from the answering machine While the answering machine is recording a message (flashing ×) you can answer the call by pressing the talk key c. Recording stops and you can speak to the caller. Play back the announcement Confirm the prompt. The prerecorded announcement is active again. Playing/deleting messages New messages are indicated in the display by a flashing message icon Û . Press the display key Û to play back new messages. Setting the answering machine for speed dialling MENU ANS MACHINE OK SET KEY 1 ANS MACHINE OK (= On). ¢ ¢ Answering machine list To listen to played messages again: Û ANS M OK. The playback begins immediately with the first new message. [. . . ] When it has fully dried out you will normally be able to use it again. Excerpt from the original declaration: "We, Siemens AG, declare, that the above mentioned product is manufactured according to our Full Quality Assurance System certified by CETECOM ICT Services GmbH in compliance with ANNEX V of the R&TTE-Directive 99/5/EC. The presumption of conformity with the essential requirements regarding Council Directive 99/5/EC is ensured. Senior Approvals Manager" The Declaration of Conformity (DoC) has been signed. In case of need, a copy of the original DoC can be made available via the company hotline. Questions and answers If you have any queries about the use of your telephone, go to www. siemens. com/gigasetcustomercare for assistance 24/7. [. . . ]