User manual HASBRO PIE FACE

[. . . ] 8 Switching off water softening system . 9 Switching off rinse aid refill indicator . 17 Express Wash/ Speed Perfect (VarioSpeed) . 17 en Safety instructions Before you switch ON the appliance Please read the operating and installation instructions carefully. [. . . ] You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly. ¿ Extra drying * Programme sequence indicator )" nxEtradigy An increased temperature during the final rinse and an extended drying phase ensure that even plastic parts dry better. There is a slight increase in the energy consumption. -/, Your dishes are being cleaned. =/< Your dishes are being dried. 17 en Remaining running time display When the programme is selected, the remaining running time of the programme is indicated on the digital display )*. The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme). nargoTiep m theprgomyarthnfeonlhSwticigoutm a aefd Switching off automatically after the end of the programme * * depending on model To save energy, the dishwasher is switched off 1 minute after the programme ends (factory setting). Automatic disconnection can be adjusted from : to : . Appliance does not switch off automatically : Off after 1 min : Off after 120 min – Close the door. – Hold down programme button # and press START button h until : . . . The LED for button # flashes and the digital display )* displays the factory setting : . – Press programme button # until the factory set value : is indicated on the digital display )*. To change the setting: – Press programme button 3. The only way a programme can be changed is by Cancel programme (Reset). 19 en Maintenance and care A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. Filters The filters 1R keep large foreign objects in the rinsing water away from the pump. These foreign objects may occasionally block the filters. The filter system consists of a coarse filter, a flat fine filter and a microfilter. – After each washing cycle check the filters for residue. – Unscrew filter cylinder as illustrated and take out filter system. Overall condition of the machine – Check spray arm for grease and limescale deposits. If you find such deposits: – Fill detergent dispenser with detergent. Start the appliance without utensils in the programme with the highest rinsing temperature. Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers. – Regularly clean door seal with a damp cloth. Never use a steam cleaner to clean your dishwasher. [. . . ] – The socket must be near the appliance and freely accessible following installation. If the plug is not freely accessible, an allpole disconnector with a contact opening of at least 3 mm must be fitted on the installation side to satisfy the relevant safety instructions. – The connection may be modified by technicians only. – A power cord extension may be purchased from customer service only. [. . . ]