User manual HASBRO PROJECT ALIEN

[. . . ] declaration of Conformity Plasmacluster Ion Generator PROJECT ALIEN This device complies with Part 18 of FCC rules. Responsible Party: HASBRO ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 Declaration of Conformity Plasmacluster Ion Generator PROJECT ALIEN This ISM device complies with Canadian ICES-001 Responsible Party: HASBRO ELECTRONICS OF CANADA LTD. 335 Britannia Road East Mississauga, Ontario L4Z 1W9 Canada TEL: (905) 568-7140 Thank you for purchasing this HASBRO Plasmacluster Ion Generator. Please read this manual carefully before using Plasmacluster Ion Generator. [. . . ] If the plug does not fit into the outlet, reverse it. if it still does not fit , contact a qualified electrician or service person. € DO NOT use the unit if the power cord or plug is damaged, or the connection to the wall outlet is loosened. • Periodically remove dust from the plug. € DO NOT insert fingers or foreign objects into the air intake or air outlet. € Always hold the plug and never pull on the cord when removing the power plug. Electrical shock and/or fire from a short circuit may result. € DO NOT remove the plug when your hands are wet. € DO NOT use the unit near gas appliances or fireplaces. € If the power cord is damaged, it must be replaced by the manufacturer, its service agent, a Sharp Authorized Service Center or similarly qualified person in order to avoid a hazard. Strong corrosive cleansers may damage the exterior. € Consult the dealer or an experienced radio/TV technician for help. This product fulfils the requirement of the International standard CISPR 11. In conformity with this standard, this product is classified as group 2 class B equipment. Group 2 means that the equipment intentionally generates radio-frequency in the form of electromagnetic radiation for electro-discharge machining equipment. Class B equipment means that the equipment suitable to be used in domestic establishments. (Do not put anything in front of the unit. ) Plasmacluster Ion Generating Unit (Inside) Please open the cover only when replacing the Plasmacluster Ion Generating Unit. Indd 11 2009/05/29 11:40:59 ESPAÑOL FRANÇAIS ENGLISH CLEANING AND MAINTENANCE WARNING: When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with wet hands. electrical shock and/or bodily injury may occur as a result. Main Unit Every month or more often if necessary. <For Stubborn Dirt> Use water and a mild detergent. [. . . ] : 3PCS without sensor (3pcs) Be sure to replace the Plasmacluster Ion Generating Units in the proper locations (with or without sensor) as indicated in the diagrams. plasmacluster Ion Generating Unit with sensor. : 1PC Reset button for Plasmacluster Ion Generating Unit After replacing the Plasmacluster Ion Generating Unit, insert the plug and press the UNIT RESET Button for 3 seconds. ENGLISH Pull the lever forward and take out the Plasmacluster Ion Generating Unit. [. . . ]