User manual HASBRO PROM DATE

[. . . ] €¢ To enable stable emission of high-density Plasmacluster ions, the Plasmacluster Ion Generating Unit mounted in PROM DATE will need to be replaced periodically*. * Replacement is required approximately every 6 years (17, 500 hours) when operated 8 hours a day. PROM DATE will stop operating after about 6 years and 6 months (19, 000 hours) if the Plasmacluster Ion Generating Unit is not replaced. declaration of Conformity Plasmacluster Ion Generator PROM DATE This device complies with Part 18 of FCC rules. [. . . ] (The damaged section could cause short-circuiting and the cord could melt, leading to fire. ) If the cord is damaged, contact your store of purchase. €¢ Do not pull on the cord when unplugging the cigar plug or the unit connection plug. (Doing so could damage the cord, leading to fire or electric shock. ) • Do not plug in or unplug the cigar plug or the unit connection plug with wet hands. ) • When transporting, be careful not to drop the unit or subject it to shocks. (Doing so could cause injury or damage. ) If the unit should drop or get damaged, contact your store of purchase. continued usage as such could lead to fire or electric shock. Also, no one other than an authorized repairman should take apart or repair the unit. (Doing so could lead to fire , electric shock or injury. ) • Do not use items of silicone-containing products* near the unit. The fluororesin or silicone could get stuck inside the unit, preventing it from producing Plasmacluster ions. If this happens, remove the dust from the electrode section of the Plasmacluster Ion Generating Unit. Car Adapter Unit Connection Plug Cord Cigar Plug (With 5A glass tube fuse) Connect to the cigar lighter socket in the vehicle. Indd 10 2010/10/13 16:35:26 INSTALLATION GUIDANCE Connecting the car adapter and installing the unit 1 Remove the filter cover. Filter cover Remove 2 Insert the car adapter's unit connection plug securely into the unit power input terminal. 3 Route the cord in one of the ways shown in the diagram, according to the place of installation, then attach the filter cover. €¢ Be careful the cord does not get caught in the filter cover. Indd 11 2010/10/13 16:35:26 ENGLISH 4 Insert the cigar plug into the cigar lighter socket. Cigar plug Ciger lighter socket • Be sure to remove any dirt from the cigar lighter socket. failure to do so could cause faulty contact. [. . . ] [After maintenance] 4 5 Re-install the unit and fix with the screw. Connect unit connection plug and set the filter cover. <AFTER THE UNIT MAINTENANCE> Press the Mode Button and check the Unit Replacing Light is lighting (green). Indd 15 2011/04/05 10:20:31 PLASMACLUSTER ION GENERATING UNIT REPLACEMENT In order to release Plasmacluster Ion stably, periodical replacement of Plasmacluster Ion Generating Unit is necessary. [. . . ]