User manual HASBRO PUZZ 3D BIG BEN

[. . . ] €¢ The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician. “WARNING: THIS APPARATUS MUST BE EARTHED. [. . . ] Care R should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down. -  are should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by C curious children. E 4 TIPS AND SAFETY INSTRUCTIONS -  he TFT color LCD panel used in this monitor is made with T the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor. -  o not display a still picture for a long period, as this could D cause a residual image. - Never rub or tap the monitor with hard objects. -  DMI, the HDMI logo and High-Definition Multimedia H Interface are trademarks or registered trademarks of HDMI Licensing LLC. -  dobe, Acrobat, and Reader are either registered trademarks A or trademarks of Adobe Systems Incorporated in the United States and/or other countries. -  his product comes with RICOH Bitmap Fonts produced and T sold by RICOH COMPANY, LTD. Provide enough space around the monitor to prevent heat from accumulating inside. For the monitor in horizontal orientation Unit: inch [cm] 7-7/8 [20] * • If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 32°F (0°C) to 104°F (40°C), install a fan or take other measures to keep the ambient temperature within the required range. €¢ Temperature condition may change when using the display together with the optional equipments recommended by HASBRO. In such cases, please check the temperature condition specified by the optional equipments. €¢ PUZZ 3D BIG BEN cannot be used in vertical orientation. €¢ Adhere to the following when installing the monitor in its vertical orientation. Failing to adhere to the following may cause malfunctions. (for PN-E421 only) I - nstall the monitor such that the power LED is located on the downside. - Set the MONITOR on the SETUP menu to PORTRAIT. ) • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. [. . . ] €¢ Do not expose the remote control unit to liquids, and do not place it in an area with high humidity. €¢ The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting. €¢ Objects between the remote control unit and the remote control sensor may prevent proper operation. €¢ Replace the batteries when they run low as this may shorten the remote control’s operation range. [. . . ]