User manual HASBRO PUZZ 3D MINIATURES EIFFEL TOWER

[. . . ] Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION The AC power socket-outlet should be installed near the equipment and should be easily accessible. FOR YOUR RECORDS Please record below the model number and serial number for easy reference in case of loss or theft. These numbers are located on the right side of the unit. [. . . ] 16 5:41 PM Page 36 Unit price and associated department assignment To program zero *2PLU code *1 p *3 Unit price (max. Key A *1: To assign departments 17 through 32, press the department shift key at this point. When the associated department is department 33-99: *2PLU code To program zero *3 Unit price (max. Code (1 to 99) d s A *2: 1 through 2000 (Depending on the EJ memory size setting, up to 200) *3: For a sub-department, set the limit amount of unit price entry. To program the following PLU, start from entering a unit price or an associated department code without pressing the A key. To program another PLU, start from the beginning without pressing the A key. Key operation example Print 1p 125 # A PLU code Unit price Associated dept. To delete a PLU code, use the following sequence: PLU code p v A To delete the following PLU To delete another PLU PLU/sub-department selection To program "0" *1PLU code p *2A s A To program the following PLU To program another PLU *1: 1 through 2000 (Depending on the EJ memory size setting, up to 200) *2: 0 for sub-department or 1 for PLU (default: 1) Key operation example Print 1p 0sA PLU/sub-dept. When you program the last PLU code, the programming sequence will be complete with a press of the s key. 16 5:41 PM Page 37 3 Miscellaneous Key Programming The cash register provides miscellaneous keys such as %, &, -, f, r, R, V, t, C, c and A. While the cash register is pre-programmed so you can use these keys, you must set a currency conversion rate to use V key. The entry digit limit is represented by the number of allowable digits for maximum entry or total amount. When “0” is set, the operation of the corresponding key is prohibited. Key operation example Print 4@ RA Function parameters for C, c and A (when using as CA key) To program “0” for all items *1ABC @ s, C c or *2 A Entry: To program for another key *2:Press s key for CA key setting. *1:Item: A B Footer printing Amount tendered entry Selection: C Entry digit limit Allow 1 Disallow* 0 Compulsory 1 Non-compulsory (for the CA or CHK keys)* 0 Inhibit (for the CH key)* 0 0-8 (default: 8) Footer printing • This option decides whether or not the machine should print a message at the bottom of a receipt when a specified media key is used. to program a footer logo message , refer to “Logo messages” section on page 45. Amount tendered entry • You may select amount tendered, compulsory or optional, for the A and C keys. € You may select amount tendered, compulsory or inhibited, for the c key. Entry digit limit • For the c and C keys, program upper limit entry amount for the tendered amount. For the A key, program upper limit entry for total cash amount which can be handled on the register. The entry digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is represented by the number of allowable digits for the maximum entry or total amount. [. . . ] Finalize the transaction, and correct the wrong entries in the void mode. 12 lines/second 24 digits each for receipt and journal paper • Graphic logo printing function • Logo message function • Receipt (ON-OFF) function, compression printing function Paper roll: Width: 2. 08 mm thickness) Cash drawer: 4 slots for bill and 5 for coin denominations Accessories: Manager key 1 Operator key 1 Drawer lock key 1 Paper roll 1 Take-up spool 1 USB cable (0GS5422580) *1 1 Quick Start Guide (English) 1 copy Quick Start Guide (Spanish) 1 copy Instruction manual 1 copy Specifications and appearance subject to change without notice for improvement. *1 Use only the USB cable (manufactured by HASBRO) supplied with the PUZZ 3D MINIATURES EIFFEL TOWER for the connection with a PC. [. . . ]