User manual HASBRO PUZZ 3D STOCKBRIDGE IN WINTER

[. . . ] General information required for loading paper, adding toner, misfeed removal, and operation of peripheral devices are described in that manual. Separate manuals are provided for the operation of network scanning and facsimile functions. Refer to the ?Operation manual (for scanner)?19 G Common operation procedure for using the special functions . [. . . ] cUSTOM SETTINGS F-CODE MEMORY BOX OK SUB ADDRESS / PASS CODE CANCEL OK ENTER THE SUB ADDRESS / PASS CODE VIA THE 10-KEY PAD , THEN PARESS [OK]. 214341434 PASS CODE STORE POLLING MEMORY CONFIDENTIAL RELAY BROADCAST AMEND/DELETE POLLING MEMORY CONFIDENTIAL RELAY BROADCAST The characters " " and "#" cannot be used in a subaddress. If you enter an incorrect digit, press the C key and reenter the correct digit. If you do not wish to enter a passcode, proceed to step 9. " that automatically appears is the lowest number No. 001 from 001 to 100 that has not BOX NAME yet been programmed. When SUB ADDRESS the BOX NAME key is touched, the letter-entry POLLING TIMES screen appears. Refer to page 6-15 for the procedure for entering letters. a slash (/) appears after the sub-address. If you make a mistake, press the C key to clear the mistake. pASS CODE 6-10 PROGRAMMING , EDITING , AND DELETING F-CODE MEMORY BOXES the numeric 8 Usedigits). Only destinations that have been programmed in auto dial keys (one-touch keys or group keys) can be selected. If you need to include a destination that has not been programmed in an auto dial key, first program it in a one-touch key (page 6-3) and then program the destination as an end receiving machine. BOX NAME SUB ADDRESS RECIPIENT FAX INFORMATION 123456/987654 3 To checkasthe destinations that have been selected end receiving machines, touch the ADDRESS REVIEW key. The destinations selected as end receiving machines are displayed. you can delete a destination by touching it. When the confirmation message appears, touch the YES key to delete the destination. ADDRESS REVIEW 2 OPQRST UVWXYZ ABC GROUP Touch the one-touch keys you wish to include as end receiving machines, touching indexes and the keys as needed. OK OK FREQUENT USE ABCD EFGHI JKLMN OPQRST UVWXYZ ABC GROUP You will return to the programming screen for the F-code relay broadcast memory box. the number of selected end receiving machines appears. The selected one-touch keys are highlighted and programmed as end receiving machines. If you touch an incorrect key, touch the key again to remove the highlighting and delete the destination. [. . . ] Push the cartridge in until it locks securely into place. Photoconductive drum Do not touch or damage the surface of the photoconductive drum. 8 Gently remove the sealing tape from the cartridge. If the machine is not equipped with a duplex module, close the side cover. [. . . ]