User manual HASBRO RISK THE LORD OF THE RINGS

[. . . ] This software allows you to move your Operating System and your personal data from your current system hard drive to your new SSD. Once the Acronis® True Image HD cloning process is complete and the data is successfully transferred to your SSD, your hard drive can then be used as a secondary drive for data storage. The software provided in this kit does not support imaging/cloning of RAID or Spanned disk arrays. There are tools and features included in the Acronis software that are not applicable to this product bundle. [. . . ] If this is the case, please attach that hardware to the 2. 5” mounting bracket for compatibility with your computer chassis. Refer to your system manufacturer’s documentation for instructions. Attach one end of the SATA data cable (provided) to the SATA interface connector on your computer’s motherboard or SATA host adapter. (Figure 2) displays an example of what a SATA connector might look like on the motherboard. sATA Connectors Figure 2: Desktop PC motherboard with 4 SATA connectors. The number of connectors on each system will vary. Note: SATA connectors are keyed to ensure correct orientation. Attach the other end of the SATA interface cable to the SSD. Attach the power cable or power adapter (provided) to the SSD. You are now ready to copy your data from the system hard drive to the SSD using the cloning software provided. 4) Restart the computer, boot to the software CD and try the cloning process again. (Manual mode should be used by advanced users only!Note: The original partition size will be scaled according to the new drive capacity. If the new drive has less space than the original drive, the partitions will shrink accordingly. If the new drive is larger than the original drive, the partitions will be enlarged proportionately. figure 6: Hard Disk Drives Structure 9. An operation progress bar will indicate the data is being copied (Figure 7). Once the cloning process is complete, a Disk Cloning was successful window will appear. Remove the Acronis True Image HD software CD and close the program. 12 SSD Desktop / Notebook Set “Hard Drive Boot Priority” Your system is now configured with two bootable drives. In order to boot from your new SSD drive, you must enter the system BIOS to set “Hard Drive Boot Priority” so that your new SSD drive is set to boot first. [. . . ] Install the SSD into your Notebook and attach the External Drive Enclosure: 1) Assemble the SSD with the system’s drive bracket and insert it into the drive bay of your notebook. Refer to your system manufacturer’s documentation for instructions. 2) Using the USB cable provided, attach the system hard drive (installed in the provided external drive enclosure) to your notebook via any USB port. 3) You are now ready to copy your data from the system hard drive to the SSD using the cloning software provided. [. . . ]