User manual HASBRO STAR WARS ANAKIN SKYWALKER LIGHTSABER ITEM NO. 84835

[. . . ] Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Electrical connections After transportation of the appliance, carefully place it in an upright position and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following: • The appliance is earthed and the plug is compliant with the law. [. . . ] Several functions (SUPER COOL, SUPER FREEZE, ICE PARTY, I CARE) are incompatible with others (HOLIDAY, . ); remember that there is a pre-set order of priority which will help you to use the product in the best possible way. When the Ice Party function has finished, press the ICE PARTY button to stop the corresponding LED from flashing and to silence the sound signal. This flashing and sound signal indicates that the function is complete and that the bottle should be removed from the freezer compartment. Child Lock In order to activate the Child Lock function, the Child Lock button must be pressed for 2 seconds; the activation of the button lock is confirmed by a short beep and the illumination of the corresponding LED. To deactivate the function, press the Child Lock button for 2 seconds; deactivation will be confirmed by a short beep and by the corresponding LED switching off. The FREEZER status bar is also used to indicate an Navigating the display Setting the temperatures: If the product is switched on, the refrigerator and freezer status bars will indicate the temperatures set at that and moment. To change them, simply press the buttons corresponding to the compartment for which you wish to change the set temperature. More specifically, each time one of the buttons is pressed the temperature is increased or decreased by 1°, and the level of cold is adjusted accordingly. The temperature values that may be selected for the refrigerator compartment are +12°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C, while the values that may be set for the freezer are -18°C, -19°C, -120°C, -21°C, -22°C, -24°C and -26°C. unusual temperature increase in the freezer compartment (see Troubleshooting). To avoid blocking the air circulation inside the freezer, it is advisable not to obstruct the ventilation holes with food or containers. 19 Maintenance and care GB Switching the appliance off During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: 1. Hold the ON/OFF button down for more than two seconds until OFF appears on both indicator displays (refrigerator and freezer). If this procedure is not followed, the alarm may sound. This alarm does not indicate a malfunction. To restore normal operation, hold the ON/OFF button down for more than two seconds. To disconnect the appliance, follow points 1 and 2 above. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. GB General safety • The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. • The appliance must be used by adults only to store and freeze food products according to the instructions in this manual. • The appliance must not be installed outdoors, even in covered areas. [. . . ] Press a second time to display the set value on the freezer status bar, switch off the ALARM LED and restore normal operation. • The temperature of the freezer is dangerously high: the food inside must not be eaten. the freezer will maintain a temperature of approximately 0°C. To switch off the buzzer, press the RESET ALARM button. [. . . ]