User manual HASBRO TRANSFORMERS SPEED STARS STEALTH MEGATRON 19481

[. . . ] 9 Locating Controls and Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Connecting a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Using the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select your desired power plan. To change the power plan settings 1 2 3 4 Click Change plan settings on the right of your desired power plan in the Power Options window. Change the Sleep mode and display settings as needed. If you need to change the advanced settings, click Change advanced power settings and go to step 3. Click OK. You can check the current power plan settings with the VAIO Power Management Viewer in the VAIO Control Center. Precautions > n 86 N Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage. Safety Information (page 87) Care and Maintenance Information (page 90) Handling Your Computer (page 91) Handling the LCD Screen (page 93) Using the Power Source (page 94) Handling the Built-in Camera (page 95) Handling Discs (page 96) Using the Battery Pack (page 97) Handling "Memory Stick" (page 98) Handling the Built-in Storage Device (page 99) Precautions > Safety Information n 87 N Safety Information Computer Use your computer on a solid, stable surface. We advise not to use your computer directly on your lap. The temperature of the bottom of the unit may rise during normal operation, and after an extended period of time, could cause discomfort or burns. Provide adequate air circulation to prevent internal overheating. Do not place your computer on porous surfaces such as rugs, blankets, couches, beds, or near draperies that may block its air vents. Use only specified peripheral equipment and interface cables. Power Source Do not place the AC adapter in contact with your skin. Remove the AC adapter away from your body if it becomes warm and causes discomfort. Do not use an abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer. Make sure you unplug the AC adapter and remove the battery pack before cleaning your computer. LCD Screen Use a soft, dry cloth to wipe the surface of the LCD screen. Rubbing the surface could damage the screen. Built-in Camera Clean the lens protection cover of the built-in camera with a blower brush or a soft brush. If the cover is extremely dirty, wipe it off with a soft dry cloth. Do not rub the cover, as it is sensitive to pressure. Discs Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc. For normal cleaning, hold the disc by its edges and use a soft cloth to wipe the surface from the center out. If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from the center out. Wipe off any remaining moisture with a dry soft cloth. Precautions > Handling Your Computer n 91 N Handling Your Computer If you drop a solid object or any liquid onto your computer, shut down the computer, unplug it, and remove the battery pack. You may want to have the computer checked by qualified personnel before operating it again. Do not drop your computer or place any objects on top of the computer. [. . . ] WinDVD for VAIO and WinDVD BD for VAIO are trademarks of InterVideo, Inc. ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of ArcSoft, Inc. ATI and ATI Catalyst are trademarks of Advanced Micro Devices, Inc. [. . . ]