User manual HASBRO WATER WORKS

[. . . ] Warning: To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION: At full power prolonged listening to a personal stereo may damage the user's hearing. The model is in compliance with the law in case of using it with the HASBRO earphones (model number RPHOH0011AWZZ). [. . . ] (Pause function does not work for approximately 10 seconds after a recording starts. ) When the microphone picks up sound again, recording starts automatically. Notes: z Whilst making a mic recording, do not connect anything to the OPTICAL/LINE IN socket on the portable MD. Z To use a microphone, be sure it is a plug-in-power type microphone. MIC SYNC H : Recording starts when the unit detects -24 dB or more (the unit can start recording from quiet sounds). Recording starts when the unit detects -12 dB or more. - If a different type of microphone is plugged in, it may not operate properly or it may cause the unit to malfunction. If you don't, the recording will not be made properly. Z If the unit starts recording too often from low unwanted noises, set the microphone input to "MIC SYNC L". Z Recording sensitivity can be changed whilst recording. When a sound, such as person speaking, is picked up by the microphone, recording will begin automatically. -Hold FunctionIf the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off. To cancel the hold mode Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode. If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained. , , Beep sound , , Auto play With a MiniDisc inserted, press the MODE/CHRG button for 2 seconds or more. You can eliminate the confirmation sound that beeps when you press a button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. During playback, maximum 40 seconds (in stereo) of musical information is stored. Auto power save function automatically adjusts the storage time between 5 and 40 seconds to reduce the power consumption. If this function is cancelled, the storage time cannot be adjusted. Every time you cancel recording, the level will return to [D. [. . . ] Z Has the track number or character information been written on the disc yet?When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. Unplug the AC adaptor from the wall socket. Leave the unit completely unpowered for approximately 30 seconds. [. . . ]