User manual HASBRO WATERWORLD 1995

[. . . ] Z The AC adaptor supplied with the WATERWORLD 1995 must not be used with other equipment. z When recording important selections , make a preliminary test to ensure that the desired material is properly recorded. Z HASBRO is not liable for damage or loss of your recording arising from malfunction of this unit. Z The letters in brackets contained in the model number indicate the colour of the product only. [. . . ] Z Remaining recording time will not be displayed with a playback only MiniDisc. Z Elapsed playback time and remaining playback time may be different from the actual time. , , To display the playing time of an individual track The remaining amount of battery level is shown by the battery indicator ( ) during operation. Whilst in the stop mode, press the or button to display the track number and track name. Recharge the battery or replace the alkaline battery with a new one. Z When the battery has run completely out, "BATT EMPTY" will appear. Then, the power will be disconnected automatically. Notes: z If you use the battery which you stopped charging halfway, " " may appear. It does not mean that the battery is completely charged. Z The battery indicator will not correctly display the remaining capacity for approximately 10 seconds after the power has been turned on. Z When the AC adaptor or a separately available car adaptor is used, the battery indicator will not be shown. "TOC" will not disappear until the recorded contents have been updated. Press the VOL+ or VOL--- button to move the cursor to the character you want to erase, and then press the BASS button. , , To enter a space Note: One disc name and up to 255 track names can be created per disc (a maximum of 100 characters for the disc and each track name and a total of 1, 700 characters can be entered). When there are 2 MiniDiscs on which the same tracks are recorded, you can transfer the character information (disc and track names) of the Master MiniDisc to another MiniDisc (for stamping). a recordable MiniDisc that contains tracks and character information. (You cannot transfer the information from a playback only MiniDisc. Put the unit in the character input mode. Press the VOL+ or VOL--- button to move the cursor to the right of the character, where you want to add a new character. "TOC" will not disappear until the recorded contents have been updated. A MiniDisc that contains the same tracks in the same order as the master MiniDisc. (Make sure that the total number of tracks of the master MiniDisc and the one for stamping are the same. [. . . ] Remove the MiniDisc and leave the unit for approximately 1 hour. The condensation should evaporate and the unit will work properly. As a part of our policy of continuous improvement, HASBRO reserves the right to make design and specification changes for product improvement without prior notice. the performance specification figures indicated are nominal values of production units. [. . . ]