User manual HASBRO WEDDING PLANNER

[. . . ] AND IRELAND Important Introduction -Special Notes- SERVICE INFORMATION In the unlikely event of your equipment requiring repair, please use the supplied postage paid label to send your unit to the Sharp repair centre or contact the dealer or supplier from whom it was purchased. Where this is not possible, please visit our web-site www. sharp. co. uk/customersupport. Customers without internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). Please note; all calls will be charged at local rate. [. . . ] If the favourite track playback mode is selected whilst playing a normal track, the unit will enter the mode after the playback. Whilst in the favourite track playback mode, moving to the beginning of track, fast forward and fast rewind can be performed only on favourite tracks. Display in the stop mode <On the remote control> 4 Total playing time The display switches after approx. 3 seconds. <On the multi-link station> Total favourite tracks Total playing time 5. Favourite track registration will be cancelled. 49 IM-DR580H(E) TINSE0568AWZZ 03/10/15 IM-DR580H(E)5. fm -Advanced Playback- Total favourite tracks Playback IM-DR580H Advanced Playback (continued) " Checking Displays To check the total playing time and remaining recording time: [Operate with the remote control or the multi-link station] Whilst in the stop mode, press the DISP/-BASS button. Each time the button is pressed, the display will change as follows. [On the remote control] To check the playing time and track name of each track: [Operate with the remote control] 1. Whilst in the stop mode, press the or button to select a track. Each time the button is pressed, the display will change as follows. Track number -Advanced Playback- Playback TTL Total playing time ( B ) Recording mode "TTL" goes out Playing time Track name (*1) Total number of tracks ( A ) Remaining recording time !"TTL" lights up. button. [Operate with the multi-link station] Whilst in the stop mode, press the select a track. or button to Disc name ( C ) (*1) Track name [On the multi-link station] (D) Disc name ( C ) Track number Playing time Total number of tracks ( A ) Total playing time ( B ) Remaining recording time !" " or " " lights up. button. 50 IM-DR580H(E) TINSE0568AWZZ 03/10/15 IM-DR580H(E)5. fm IM-DR580H To check the elapsed time and remaining time of the current track: [Operate with the remote control or the multi-link station] During playback or whilst in the pause mode, press the DISP/-BASS button. [Operate with the multi-link station or the remote control] ( ) indicates operations on the remote control. Group Recording / Group Playback -Recording by Group- 1 Press the REC button. Lights Flashes (paused) 2 3 4 Press the MODE/-CHARGE (MODE) button repeatedly to select the recording mode (page 33). Select "GrSELECT" by pressing the or button and press the ENTER/USB ( ) button. 54 IM-DR580H(E) TINSE0568AWZZ 03/10/15 IM-DR580H(E)6. fm IM-DR580H Group Recording / Group Playback 5 6 7 Press the ENTER/-USB ( Start recording. ) button. Tracks are recorded in the group selected in step 5. To change the group, stop recording and start over from step 1. Manual recording (See steps 6 - 9 on pages 22 - 23. ) Synchro recording (See steps 6 - 10 on pages 24 - 25. ) Recording from a Microphone Manual recording (See steps 6 - 9 on pages 28 - 29. ) Synchro recording (See steps 6 - 12 on page 30. ) 55 IM-DR580H(E) TINSE0568AWZZ 03/10/15 IM-DR580H(E)6. fm -Recording by Group- Press the or button repeatedly to select a group to add tracks to. NEW GROUP (NEW-Gr): To create a new group. GR01, GR02, GR03. . . : To add tracks to an existing group. (If the group name has been recorded, the name will be displayed instead of "GR01". ) Non GROUP (Non-Gr): To record tracks as non-group. " On the remote control, only "NEW-Gr" or "Non-Gr" can be selected. " Setting for group recording will not be changed until a new setting is entered. To cancel settings for all groups, select "Non GROUP (Non-Gr)". Notes: " When a group-recorded MD is used for recording or editing on other equipment, malfunction may occur. " After group recording, tracks not in the group (non-grouped tracks) are moved behind the group and track numbers change. [. . . ] There may be some deviations from these values in individual units. Power source: Power consumption: Output power: Charging time: DC 1. 2 V: Rechargeable Nickel-Metal Hydride Battery (AD-N55BT) x 1 DC 1. 5 V: Commercially available, "AA" size (LR6), alkaline battery x 1 DC 3 V: AC adaptor (AC 110 - 240 V, 50/60 Hz), with the multi-link station 60 mA (AC adaptor) RMS: 16 mW (8 mW + 8 mW) Approx. 5. 5 hours (fully charged)(When using the AC adaptor included with the unit) Width: 80. 1 mm Height: 16. 6 mm Depth: 72. 6 mm 120 g with rechargeable battery/95 g without rechargeable battery Multi-link station; exclusive USB socket Main unit; Microphone (powered by the main unit) Multi-link station; Line/optical digital Main unit; Earphones (impedance: 32 ohms)/remote control Multi-link station; audio output, speaker output Portable MiniDisc recorder Non-contact, 3-beam semiconductor laser pickup Stereo 2 channels/monaural 1 channel 20 - 20, 000 Hz ( 3 dB) Approx. 400 - 2, 700 rpm CLV (Recording) ACIRC (Advanced Cross Interleave Reed-Solomon Code) ATRAC/ATRAC3 (Adaptive TRansform Acoustic Coding), 24-bit computed type Magnetic modulation overwrite method 44. 1 kHz (32 kHz and 48 kHz signals are converted to 44. 1 kHz, and then recorded. ) Unmeasurable (less than 0. 001 % W. [. . . ]