User manual HASBRO WHO WANTS TO BE A MILLIONAIRE HANDHELD 2000

[. . . ] ADVERSEL USYNLIG LASERSTR LING NSTRDEKSEL PNES OG SIKKERHEDSL S BRYTES. LNING N R DENNA DEL R PPNAD OCH GE FFNET UND VORSICHT UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG STRAHL AUSSETZEN. NICHT DEM LASERSTR LING SIKKERHEDSAFBRYDERE ER ADVARSEL USYNLIGFUNKTION. AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA N KYM T NT LASERS TEILYLLE. [. . . ] Auto power shut-off mode When the copier enters the auto power shut-off mode, the power save ( ) indicator will light up and other indicators will go out. The auto power shut-off mode saves more power than the preheat mode but requires a longer time before starting copying. To copy from the auto power shut-off mode, press the print ( ) key. Then make desired copier selections and press the print ( ) key using the normal copying procedure. 4 Special functions q Auto clear (page 18) The copier returns to the initial settings a preset amount of time after the last copy is made. This preset amount of time (auto clear time) can be changed. HIGH IMAGE QUALITY MODE 1 Press the exposure mode selector key to select the manual ( ) mode. 17 HIGH IMAGE QUALITY MODE 2 Press and hold down the exposure mode selector key for approximately 5 seconds. The manual ( ) indicator will go out and the photo ( ) indicator will begin to blink. The exposure indicator marked "1" will light up, indicating the standard toner mode is active. 3 To enter the toner save mode, press the dark ( ) key. The exposure indicator marked "5" will light up, indicating the high image quality mode is selected. 4 Special functions 4 Press the exposure mode selector key twice. The photo ( ) indicator will stop blinking and the AUTO indicator will light up steadily. The high image quality mode is now active. To return to the standard mode, repeat the procedure but use the light ( to select exposure level "1" in step 3. The indicator will go out and the ready ( ) indicator will light up. When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged. 21 USER MAINTENANCE Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to regularly clean the copier. q Do not use thinner, benzene or other volatile cleaning agents. Doing so may cause deformation, discolouration, deterioration or malfunction. Before cleaning, be sure to turn the power switch off and remove the power cord from the outlet. q Cabinet Wipe the cabinet with a soft, clean cloth. Original table and original cover Stains on the glass or cover will also be copied. Wipe the glass and the cover with a soft, clean cloth. If necessary, dampen the cloth with a glass cleaner. Original table Original cover 5 Supplies and user maintenance Transfer charger If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure. 1 Turn the power switch off. Open the side cover while pressing the side cover open button. 2 22 USER MAINTENANCE 3 Take the charger cleaner out by holding the tab. 4 Set the charger cleaner onto the right end of the transfer charger, gently slide the cleaner onto the left end, and then remove it. [. . . ] The AUTO indicator will stop blinking and light up steadily. This automatic exposure level will remain in effect until you change it again by this procedure. 30 7 Type Copy system Originals Original size Copy sizes Copy speed APPENDIX Digital copying machine, desk-top type Dry, electrostatic transfer Sheets, bound documents Max. B4 (257 mm x 364 mm) (10" x 14") A6 to A4 (105 mm x 148 mm to 210 mm x 297 mm) (3-1/2" x 5-1/2" to 8-1/2" x 14") (Feed copy paper lengthwise only. ) Image loss: Max. 4 mm (5/32") (leading and trailing edges) Max. [. . . ]