User manual HASBRO WORD CHAOS

[. . . ] 4 Part names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing batteries in the remote control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Watching TV Watching a TV programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Operating the TV buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · To select a two-digit channel, such as 15, press to select 1 5 the two-digit input. Press , and then press . TV/VIDEO 1 4 7 2 5 8 0 3 6 9 1 5 -115 PAL B/G CH CH CH MENU CH SURROUND NORMAL LANGUAGE 3 Adjust volume using . · The number of oval blocks " " indicates the volume level. The volume bar disappears approximately three seconds after the volume has been adjusted. / TV VOLUME 10 · When the power indicator lights up dimly, either CH / CH on the TV can be pressed to turn on the power. · The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for channels tuned using fine tuning. · When the power indicator lights up dimly, the TV is in Standby mode and power is still supplied to the TV. If you will not watch TV for a while, turn off the main power by pressing POWER on the TV set. Also, if you will not be at home for a considerable length of time, unplug the cord from the outlet. · The AV1 (or COMPONENT), AV2 input channels cannot be selected using CH / CH on the remote control. · Channels that have been skipped cannot be selected. · The on-screen displays in this manual may differ from their actual appearance. E8 WORD CHAOS_07-11E 8 29/12/04, 9:24 am 2 1 E - F G 1 S _ 0 7 - 11 E Dimension: 176 x 250 mm ENGLISH Watching TV FLE (M) Sdn. Bhd Watching TV Operating the TV buttons Simple operation of the TV set Behind the door Using Press Press / to increase volume. · FINE The frequency changes to allow fine tuning. 6 Press MENU until normal screen appears. · When you select AV1, AV2 for the channel position, the CH-SETTING menu changes as shown on the right and the colour mode changes in the following order: AUTO PAL SECAM N443 CH-SETTING POSITION COLOUR AV1 AUTO CH :SELECT :ADJUST MENU:RETURN N358 · Switching COLOUR system: Set the system to "AUTO" for normal TV reception. The AUTO mode automatically detects the receiving signal system and changes the reception system of the TV set. When the picture is not stable, switching to an appropriate system may improve the picture quality. · In a weak reception area, or under bad reception conditions, you can change the frequency by fine tuning. · When using FINE, the channel number changes from green to yellow. · To return the channel to its original frequency setting, follow the manual channel tuning procedure. See 15 . E 16 WORD CHAOS_12-16E 16 29/12/04, 9:01 am WORD CHAOS_12-16E Dimension: 176 x 250 mm ENGLISH FLE (M) Sdn. Bhd Settings and adjustments Picture adjustment TV/VIDEO 1 2 CH CH Press screen. MENU to call MENU MENU PICTURE SOUND FEATURE TIMER CH-SETTING 1 4 7 2 5 8 0 3 6 9 Press CH / select "PICTURE". CH to CH CH MENU 3 4 Press / display PICTURE menu. Press CH / CH select adjustment items. to PICTURE CONTRAST COLOUR BRIGHTNESS TINT HASBRONESS WHITE TEMP 50 0 +10 -10 SURROUND NORMAL LANGUAGE to MENU TV NORMAL 5 Adjust using / . · Wait for approximately three seconds to return to PICTURE menu. CONTRAST - 50 + 6 7 Repeat steps 4 and 5 above to adjust other items. Press MENU until normal screen appears. · Pressing NORMAL while a PICTURE selection is displayed, only the selected mode is reset to the standard (factory-setting) position. · Pressing NORMAL while a PICTURE menu screen is displayed will reset all the items of PICTURE menu to the standard (factory-setting) position. The following table lists the adjustment items shown in the PICTURE menu and how they change as you press / . Selected item CONTRAST COLOUR BRIGHTNESS TINT HASBRONESS WHITE TEMP Press To decrease contrast For less colour intensity For less brightness To move tint toward red For less sharpness To more reddish background Press - + + + - + To increase contrast For more colour intensity For more brightness To move tint toward green For more sharpness To more bluish background *: TINT can only be selected and adjusted when receiving NTSC broadcasts. E 17 WORD CHAOS_17-23E 17 29/12/04, 9:03 am WORD CHAOS_17-23E Dimension: 176 x 250 mm FLE (M) Sdn. [. . . ] · Be sure to fully insert the plugs of the connecting cables into the terminals on the TV set and video equipment. · Before connecting the cables, turn off the power of the TV set and video equipment. · Always remove the cables from the terminals by the plugs and not the cables themselves. E 24 WORD CHAOS_24-28E 24 29/12/04, 9:08 am WORD CHAOS_24-28E Dimension: 176 x 250 mm ENGLISH Connections FLE (M) Sdn. Bhd Connections Connecting to an antenna To enjoy a clearer picture, use an outdoor antenna. [. . . ]