User manual HASBRO XRC PRO SPEED

[. . . ] From the Table of Contents you can jump to various pages. Click this button to display the Index of the Online Manual. From the Index you can jump to various pages. To return to the previous link, click the ( ) button on the menu bar of the Acrobat Reader. CONTENTS INDEX 1 Takes you forward page by page. Following links Links can connect parts of a document to other parts for further information. [. . . ] Use "Save" in your application to select a file name and folder for the scanned image, and save the image. To cancel your scanning job after clicking the "Scan" button, click the "Cancel" button. Note To view Help for a setting, click the ( ) button in the upper right-hand corner of the window and then click the setting. CONTENTS INDEX 16 3 1 2 3 Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 1) Place the original on the original table. The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner and Camera Wizard" lets you scan an image without using a WIA-compliant application. 4 Click the "Next" button. Reference: For information on setting an original for scanning, refer to "ORIGINAL PLACEMENT" in the Operation Manual. Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras". Click the "HASBRO XRC PRO SPEED" icon and then click "Get pictures" in "Imaging Tasks". The "Scanner and Camera Wizard" will appear. CONTENTS INDEX 17 3 5 Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 2) Select the "Picture type", and click the "Next" button. You can click the "Preview" button to display the preview image. 6 Specify a group name, format and folder for saving the image, and then click the "Next" button. JPG, BMP, TIF or PNG can be selected for the format. To begin scanning, click the "Next" button. Note To adjust the resolution, picture type, brightness and contrast settings, click the "Custom settings" button. CONTENTS INDEX 18 3 7 Scanning an Image from the "Scanner and Camera Wizard" (Windows XP) (part 3) When scanning ends, the following screen will appear. Select the next task you wish to perform, and then click the "Next" button. If you are ready to end the session, click "Nothing. I'm finished working with these pictures". 8 Click the "Finish" button. Note that some computers may use different names for the modes. If you are using Windows XP, the "Found New Hardware Wizard" may appear after you change the port setting. In this case, click the "Cancel" Caution button to close the wizard, and then reinstall the printer driver as explained in "INSTALLING THE SOFTWARE" in the Operation Manual. Reference: Plug and Play Screen does not Appear (when the USB is connected) CHECK1 Is there enough computer memory or hard disk space? To use this unit, you must have an adequate amount of hard disk space. If there is insufficient hard disk space, delete unnecessary files to increase the free space of the hard disk. If there is insufficient memory, close unnecessary applications to increase memory available for printing or scanning. If you are still unable to print or scan, install more memory into your computer. CHECK2 Is your hard disk fragmented? When data is frequently stored/deleted, the hard disk may become fragmented causing a reduction in printing or scanning speed. In this case it is recommended to defragment your hard disk. You may use the Windows tools or a commercially available hard disk defragmenting tool. CONTENTS INDEX 24 4 1 2 Plug and Play Screen does not Appear (when the USB is connected) Click the "start" button, click "Control Panel", and then click "Performance and Maintenance". On Windows 98/Me/2000, click the "Start" button, select "Settings", and then click "Control Panel". Click "System", click the "Hardware" tab, and click the "Device Manager" button. "Universal Serial Bus controllers" will appear in the list of devices. If the Plug and Play screen does not appear after you connect the unit to your computer with a USB cable and turn on the power of both devices, follow the steps below to verify that the USB port is available. 3 Click the ( ) icon beside the "Universal Serial Bus controllers". Two items will display, your Controller chipset type and Root Hub. [. . . ] Click the "Brightness/Contrast" button in the Preview screen to change to the Brightness/Contrast screen, and adjust the "Brightness" and "Contrast" values. A preview of the image using the new values appears under "After". When the image of the back side disappears and you can get only the needed image, click the "Apply" button to apply the new settings, and then click the "Scanning" button to scan the image. CONTENTS INDEX 30 4 The Scanned Image is Incorrectly Positioned Place the original straight on the original table. Reference: Refer to "ORIGINAL PLACEMENT" in the Operation Manual for the detail on how to set the original. If the scanned image is incorrectly positioned, refer to the check list shown below. CHECK1 Have you placed the original straight? [. . . ]