User manual HASBRO ZOIDS BARIGATOR

[. . . ] · Never put any heavy object on the AC power cord. · Do not attempt to repair or reconstruct the AC power cord in any way. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. AS THE LASER BEAM USED IN THIS PLAYER IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. [. . . ] · Playback will pause and sound will be muted. 2 The disc goes forward by one frame each time STILL/PAUSE is pressed. 3 To exit step by step playback, press PLAY. 2 Press s or B to select ORIGINAL or PLAYLIST. · PLAYLIST will not be displayed when it has not been made. · Resume playback will not be possible if you change the setting. 3 Press K or L to select a title, then press ENTER. · Playback will start. NOTES: · [ORIGINAL]: A list of titles which are recorded with a DVD recorder. [PLAYLIST]: A list of titles which is made based on the ORIGINAL edited list. · With discs recorded in VR mode, changing the audio (MAIN, SUB or MAIN+SUB) is effective only when using an analogue connection. Although you may be able to change the settings of the on-screen display, it will not affect the sound when using a digital connection. ­ 13 ­ EN PLAYING A DISC Fast Forward / Reverse Search Zoom DVD CD MP3 DVD-RW VR mode VCD DVD DVD-RW VR mode VCD 1 During playback, press FWDg or REVh repeated- ly to select the required forward or reverse speed: x2, x8, x50, x100. · If you are using FWD g or REV h on the front panel, press and hold it for more than 1. 5 sec (the longer you hold it, the faster the speed will be). When you reach the desired speed, release the button. The Zoom function allows you to enlarge the video image and to pan through the enlarged image. 2 Press ZOOM repeatedly to select the required · For video CDs, the speed is fixed at x2, x8 or x30. 2 Within 30 seconds, enter a desired disc time using the numerical key pad. · Playback will start at the specified time. REPEAT TRACK CD VCD without PBC function NOTE: · Press CLEAR to erase the incorrect input. To activate the repeat function, press REPEAT during playback. · The repeat mode changes as described below every time you press the button. TRACK (current track repeat) ALL (entire disc repeat) OFF (repeat off) NOTES: · · · The REPEAT setting will be cleared when moving to other track. Repeat playback does not function during A-B REPEAT playback. Repeat playback is not available when you play the Video CD with PBC function. A-B REPEAT DVD · CD DVD-RW VR mode VCD 1 Press A-B REPEAT at your chosen starting point. 2 Press A-B REPEAT again at your chosen end point. · A-B appears briefly on the TV screen, and the repeat sequence begins. 3 To exit the sequence, press A-B REPEAT . NOTES: · · · · The A-B REPEAT section can only be set within the current title (for DVDs), or current track (for audio CDs). A-B REPEAT is not available with some scenes in DVD. To cancel the A point which was set, press CLEAR. A-B REPEAT playback does not function during title, chapter, track or all repeat playback. ­ 15 ­ EN PLAYING A DISC Programme MP3 Playback CD You may determine the order in which tracks will play. 1 Press MODE (playback must first be stopped). [. . . ] The player does not respond to ­Aim the remote control directly at the sensor on the front of the player. the remote control ­Reduce the distance to the player. ­Replace the batteries in the remote control. ­Re-insert the batteries with their polarities (+/­ signs) as indicated. [. . . ]