User manual HASSELBLAD PCP80

[. . . ] pRogRAMMABLE To make the camera suit specific requirements its design includes over 30 functions that can be tailored by the user. The camera features four buttons than can easily be programmed as short-cuts to the most used functions of the camera. In this way you can instantly reach your favorite function just by clicking a button. pRoFILES FoR SIMpLICITy AnD SAFETy With the numerous functions that can be set by the user for optimal use, a demand for a fool-proof way of controlling these changes arose - and thus the "profiles" function was developed. [. . . ] This memory can later also be recalled by a click of a button. This saves you time, but perhaps most important, it prevents mistakes from happening. BUILT-In FILL FLASH The viewfinder also features a compact flash. Though primarily intended to be used as fill flash it can also be used as main flash in some cases. The flash has a metric guide number of 12, but when used as fill flash with -2 stops adjustment it is equal to guide number 24. AUToMATIC FLASH With the SCA 3902 flash adapter, any flash compatible with the SCA3002 system defined by Metz can be used. This means that you can choose from small and compact flashes for extremely portable use as well as larger and more powerful flashes when so required. A FUTURE-SAFE InvESTMEnT The PCP80 camera is built to the very strict standards that have always has been used by Hasselblad, ensuring a long life even with tough use. The firmware in the PCP80 camera is upgradeable, meaning that existing cameras will acquire new features just by upgrading their firmware. This can easily be carried out by any of Hasselblad's service centers, which are also there for you when the camera, just like your car, requires its regular service. DoT-MATRIX DISpLAyS The grip LCD and the viewfinder LCD is of dot-matrix type. Uses built-in flash or flashes compatible with SCA3002 (MetzTM). For manual flashes a built-in metering system is available. ISo range 16 to 6400 (excluding any exposure adjustment). Metering options: Spot, Centre weighted and Average. Metering range Spot: EV2 to 21, Centre weighted: EV1 to 21, Average: EV1 to 21. Exposure adjustment from -5 to +5 EV in 1/3 stops. Manual, Aperture priority, Shutter speed priority, programmed and programmed variable. Maximum 32 frames with film (unlimited with digital back). Interval time can be set from 1 second to 1 hour. number of exposures can be set to 2, 3, 4, 5 and no limit. Available when using manully controlled flashes. [. . . ] Available when using manully controlled flashes. Flash can be used at all shutter speeds. Flash can be synchronized in the beginning or at the end of the exposure. TTL hot-shoe on viewfinder or standard pC connector on camera body. [. . . ]