User manual HAUCK MANHATTAN SHOP N DRIVE

[. . . ] WARNING: Do not add a mattress into the pushchair. Warning: Check that the pram body or seat unit attachment devices are correctly engaged before use. Please use only original hauck accessories and original hauck spare parts. Avoid extreme usage situations that restrict your control over the child and the pushchair. [. . . ] Pull it to ensure it is locked in place. To remove the rear wheel, release the lock on the rear axle and pull the wheel off (3c). 4a, 4b) First take out the 2 plastic caps from the front wheel fork (4a), fix the front wheel through the front axle, then push the 2 plastic caps back to the front wheel fork (4b). Make sure the pushpin locks in place and cannot be pull off. 5) The front swivel wheel can be adjusted by locking or unlocking the lock, mount on top of the front wheel. 6) Press the rear brake down by foot to stop the rear wheels and push the stroller to check. Attention: Always apply both brakes when parking the stroller. 7a, 7b) the back rest is adjusted via the pull belt with clasp which is located at the rear part of the seat upholstery. This enables the inclination of the back rest to be individually adjusted. Pull the belt while holding the clasp to set the seat in sitting position. Press the button on the clasp and pull the clasp down to release the seat to lying position. ) The child should be harnessed in at all times and should never be left unattended. The child should be clear of moving parts while making adjustments. this stroller requires regular maintenance by the user. Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use as instructed. Never use the harness without the shoulder straps. 14) there are 2 shoulder harness height available in the stroller, use the slot closest to child's shoulder height. OPtIoN FEAtURES ­ SHoP N DRIVE tRAVEL SYStEM: This stroller is able to adapt our Hauck Zero Plus® Infant Carseat as a Travel System. To adapt the carseat, please follow the following steps: A. There is an adaptor clip on the each side of the stroller's folding plastic, pull both of them up. Release the stroller seat to the lowest recline position. Push the Zero Plus® Infant Carseat down until you hear the clip sound on both left & right sides (figure C1, C2). [. . . ] cleaning the covers Remove the covers from the frame by loosening the loops , press studs or screws. Please read the instructions on the sewn-in label before cleaning. To clean the cover gently, wipe it down evenly using only a damp cloth. As long as there are no plastic, wood or metal parts on or in the cover, it can be machine-washed at 86°F (30°C) and medium speed. [. . . ]