User manual HAUPPAGE MEDIA MVP QI

[. . . ] Ote: Your TV set needs to have either a SCART or AV inputs. If your TV only has RF inputs (normally from a TV antenna), then you will need to use a Video-to-RF modulator (not supplied). You will be asked if you would like MediaMVP to be allowed to schedule a recording via a Hauppauge WinTV. Plug in the supplied power adapter to a wall socket, and plug the 6volt power plug into the MediaMVP Connect the MediaMVP (optional for . [. . . ] To delete a directory, right press your mouse on a directory, then press Remove. The Music menu will show MP3 files, WMA audio or Music Playlists which are located in selected directories on your PC. You can play a music file (indicated by the music icon next to the file name) by either pressing the "Play" button or the "OK" button on the remote control. When you are finished searching for your media, press Save then close the Search application. You can also choose directories for music, digital pictures and videos from the MediaMVP "Settings" menu. for instructions , in the section entitled "MediaMVP menus" , look at the Settings menu. Ote: the first time you enter a directory, it takes a long time (as long as several minutes) while thumbnail images are created. The next time you enter the directory, the response will be immediate. You can also turn off thumbnailing in the Settings/Configuation menu. To navigate to a sub menu (indicated by the `folder' icon), move the cursor to the folder by using the arrow buttons on the Remote control and press the "OK" button on the remote. playlists are indicated by the `playlist' icon. To play a playlist, simply move the cursor to a playlist and press "OK" on the remote control. supported playlists are: M3U , PLS , B4S , and ASX. Hitting one of the Quick Jump buttons on the remote (the 0 to 9 buttons) will move you to 10%, 20%, etc in your music playlist. Just create the file in any text editor and save it into your music directory with an M3U extension. Just create the file in any text editor and save it into your music directory with an ASX extension. To return to the Pictures menu while viewing a picture, press the "Back" button on the remote control. While running a slideshow, you can press "Pause" to pause the slideshow. Hit either "Pause" again or "Play" to resume the slideshow. When viewing pictures, the Skip ahead button on the remote control will move 6 pictures forward, while the Skip back button will skip back 6 pictures. You can play a video file (indicated by the video icon or the video thumbnail) by either pressing the "Play" button or the "OK" button on the remote control. Types of video files supported are MPEG-1 and MPEG-2, from less then 1 Mbit/sec up to 8 Mbits/sec, or DivX movies. [. . . ] When you want to play a radio station, the MediaMVP application running on the PC opens that file, goes to the URL within the file and then streams the audio over your network to the MediaMVP where the , audio is then played out to your TV set. If the file holds a link which is not valid (a link which does not directly point to an Internet radio station), then the MediaMVP radio software waits for about 1 minute before it senses that it cannot open the URL and find a radio station. Thumbnails take a long time to generate, and might even stop your PC from operating if there is a video defect in one of the movies in your Videos directory. To solve this problem, turn OFF video thumbnails in Settings/Configuration. [. . . ]