User manual HAUPPAGE WINTV-HVR-1200/1700/2200 QI

[. . . ] TV Aerial (preferably connect to a rooftop aerial) Plug your TV antenna into the TV Connector. Composite video input Audio and video from an external A/V device (satellite TV S-Video input receiver, cable TV box, VCR, camcorder. [. . . ] On Vista you must run HCWClear as Administrator. Ote: If you have a WinTVHVR-1200 you will need to run Step 2 to install the MCE encoder which will allow the analogue tuner to be used in Media Center. If you have a WinTV-HVR-1700 or WinTVHVR-2200 you do not need to run this step. If you are unable to receive some or all DVB-T channels We recommend using a roof top antenna when trying to receive digital channels, you may also need a signal booster depending on the reception in your area. You can find more information about reception from our forum and support phone line. The Media Center remote control receiver box is a small USB device which receives remote control commands. To install the Media Center remote control receiver, simply plug it into any USB port on your Media Center PC, Windows Vista will then automatically install the drivers for the USB receiver. Insert now the 2 AA batteries into the Media Center Remote control transmitter. WinTV have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] The device may not be disposed of with household rubbish. This appliance is labeled in accordance with European Directive 2002/96/EG concerning used electrical and electronic appliances (Waste Electrical and Electronic Equipment - WEEE). [. . . ]