User manual HAUPPAGE WINTV-HVR-900 QI

[. . . ] Ote: If you do not receive channels using the portable antenna, try connecting a rooftop aerial to the device and scan again, if channels are now received there may be an issue with signal strength/quality in your area you may not be able to use the small antenna. Ote: If you have any anti-virus software enabled, please disable it during the installation of the software. You can also connect sources via the A/V input cable (available on some models of WinTV-HVR-900). Plug the A/V input cable into the small connector on the side of the WinTVHVR-900 Connect your source using either the Composite or S-Video connection and the audio mini-jack connector. [. . . ] Clicking the Slow Motion button while playing video will play in Slow Motion. Clicking the Slow Motion button again, will continue playing normally. Clicking the Rewind button again will continue the playing of the video. Clicking the Fast Foward button two times will fast foward your video at 8X speed. Clicking the button again will continue playing back at normal speed. Clicking the Fast Forward button two times will fast forward your video at 8X speed. Clicking the Slow Motion button during playback will cause the video to play in slow motion (at 1/2 speed). Clicking the Slow Motion button again will return the video to normal playback speed. Play forward slow While in the Pause mode, hitting the Replay button acts like the Instant Replay you see on TV broadcast sporting events: the audio/video goes back in time and you repeat what you have previously seen. Each click of the Replay button causes audio/video to go back 10 seconds. For example, if you want to repeat the audio/video you saw 10 seconds ago, you would click the Replay button once. If you want to see the video you saw one minute ago, you would need to click the Replay button six times. For extended replay times, you might find it more convenient to grab the Video Position indicator control bar and move it to the left. Once you let the control bar go, audio/video starts to play (it might take a few seconds for the WinTV application to start playing). You might have to move the Video Position indicator to the left and right to find the desired spot to start replaying audio/video. Functions: When recording TV, the record button will depressed A time counter will be shown indicating the lenght of time of the recording If you click Stop the time counter will revert back to 00:00:00 The time is specified in a Hour:Minute:Second format. In the File menu you can: Rename your recorded video file: To rename a video file, find the file you would like to rename, highlight it with your mouse, and click and hold the right mouse button. Go down to Rename and then you can type in a new name. Remember: you must keep the MPG extension on the file. Play a video file previously recorded: Find the file you would like to play, highlight it with your mouse (one click of the mouse button) and click Open. Delete recorded video files which you no longer want: Click your right mouse button on the video file once, go down the menu and click Delete. WinTV-Scheduler, once it is set, can be closed, and the WinTV application will "wake up" at the desired time and tuned to the desired channel. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna. [. . . ]