User manual HAUPPAGE WINTV-NOVA-S QI

[. . . ] TV mode Volume Always on Top PREF Configuration Setup Menu CFG Configure Snapshot Freeze picture Channel up Channel down Channel Surf Last channel recall Click your right mouse button in the TV window to remove toolbars. When it is completely booted, the Add New Hardware Wizard will appear. There are three buttons to control the watching, recording and pausing of TV (NOTE: Only available for DVB-S, is not available for Analogue). Clicking on the Pause button will cause the Pause menu to roll down from the WinTV2000 application, while clicking on the Record button will cause the Record menu to roll down. [. . . ] Plus single or two field captures for capturing motion or still image video. audio: Your audio settings are configured here. Colour: Adjust the colour of you TV picture here. Clicking the Fast Foward button two times will fast foward your video at 8X speed. Clicking the button again will continue playing back at normal speed. Clicking the Slow Motion button during playback will cause the video to play in slow motion. Clicking the Slow Motion button again will return the video to normal playback speed. In the File menu you can: Rename your recorded video file: To rename a video file, find the file you would like to rename, highlight it with your mouse, and click and hold the right mouse button. Go down to Rename and then you can type in a new name. remember:you must keep the MPG extension on the file. Play a video file previously recorded: Find the file you would like to play, highlight it with your mouse (one click of the mouse button) and click Open. Delete recorded video files which you no longer want: Click your right mouse button on the video file once, go down the menu and click Delete. EXE is loaded every time after Windows has booted. If you need to restart the remote control, select Restart IR from the Start \ All Program Files\WinTV directory. Please ensure the following before trying to use this option: 1. Use the scroll up and down button to select WinTV2000 and press OK to select. Command line options for the Wintv2000 Application To start the WinTV application with a specific command line option you need to click on: Start / Run and type in: "C:\Program\WinTV\WINTV2K. EXE" You can now select some NoSplashScreen = WinTV2000Mode = NoTipOfDay = Suite = Channel = WindowMode = of the following options: -nss -cg -ntod -sSuiteName -cChannelNumber -mMode ("tv", "NoTitle", "Title", or "Off" (all case less) (Note: `Off' will cause an existing instance of the Wintv app to exit) Clicking the Slow Motion button while playing video will play in Slow Motion. Clicking the Slow Motion button again, will continue playing normally. Clicking the Fast Forward button two times will fast forward your video at 8X speed. Sound up - Page Up - Page Down - Chanel Up - Channel Down - Frame TV - Frame Print - Still image Ctrl+M ALT+M 0-9 F1 SHIFT+F1 Space bar - Mute on/off - Re-size TV menu - Channel number to enter - Launch Help - Online Help - Take a Snapshot Sound downPlus (+) Minus (-) Ctrl T Ctrl P Ctrl F Ch: Mute: Ch: REC: Stop: <<: Play: >>: Pause: Skip: 0-9: text (*): Sub/CC (#): Red button: Green button: Yellow button: Blue button: Function Open WinTV-Remote Menu WinTV turn on / off Full screen TV Window on / off No Function No Function No Function No Function Start and Stop Radio Application Confirm selection Exit the Record/Pause; Select previous channel Will show the Task manager window for active screen Volume up / down Select the previous channel Sound on / off Select the next channel Start a recording Stop a recording; Exit pause mode Rewind Start playing Forward Start Pause-Mode (Timeshift) Skip ahead (x2 / x 4 / x8) Channel number Start VTPlus teletext application Sub-titles on / off Starts WinTV2000 Closes WinTV2000 Subtitle / closed caption on / off Snapshot The Pause buffer is space on your hard disk where video is stored during the Pause mode. The maximum amount of time which your TV program can be delayed is dependent upon how much storage space you have set for the Pause buffer. [. . . ] Once you let the control bar go, audio/video starts to play (it might take a few seconds for the WinTV2000 application to start playing). You might have to move the Video Position indicator to the left and right to find the desired spot to start replaying audio/video. While Replaying, your audio/video program continues to be recorded in the Replay Buffer. Therefore, if you have clicked the Replay button 3 times (so that you are replaying the audio/video seen 30 seconds ago), the video you see in the WinTV window will be 30 seconds behind the "live" audio/video program. [. . . ]