User manual HAUPPAUGE MEDIAMVP-HD INSTALLATION GUIDE

[. . . ] Hauppauge! ® MediaMVP-HD Installation Guide Contents of the MediaMVP-HD package MediaMVP device. The MediaMVP-HD has audio/video connectors on the back for HDMI, Component video, S-video, composite video, stereo audio and SPIDF digital optical audio. Ethernet cable for connection between the MediaMVP-HD and your network router, hub or switch. This uses RJ-45 connectors and is 1. 5 meters long. [. . . ] If your HD TV uses component video, SVideo or composite, use the appropriate cables (not included with the MediaMVP-HD package) and connections from the back of MediaMVP-HD. Step 2: Turn on your TV set and the MediaMVP-HD Turn on the MediaMVP-HD Once you have made a connection to the HD TV set, plug in the power to the MediaMVP-HD and push the power button on the front of the MediaMVP-HD. You should see a green light on the front of MediaMVP-HD, indicating that it is operating. Switch to the correct source on your HD TV: You need to select the correct 7 Video Input on your HD TV set. Each TV set does this differently, but many TV sets have a button marked "Video source" on the remote control. You will need to find the correct source which corresponds to the connection you made from the MediaMVP-HD. Once you select the correct source, you should see the MediaMVP-HD main screen. If you do not see the main screen and you are using HDMI, you might need to change the video format setting on your HD TV set or the MediaMVP-HD. Please see Step 3: Configure the HDMI video format of MediaMVP-HD to match your HD TV set (if necessary) for tips on matching your HD TV video format to the MediaMVP-HD. Step 3: Configure the HDMI video format of MediaMVP-HD to match your HD TV set (if necessary) If you are using HDMI to connect to your HD TV, MediaMVP-HD typically adjusts the HDMI setting automatically. For some HD TV sets, the automatic settings do not work properly. There are a few things you can do in this case: - you can use the MediaMVP-HD Setup menu to manually set MediaMVP-HD to HDMI video settings. To do this, we suggest you connect both the Composite video and HDMI video to your HD TV at the same time. If you do this, you can see the MediaMVP-HD screen using composite video. You can then quickly switch back and forth between Composite and HDMI to see if you have chosen the correct settings. - you can use the Component video connections, which are also high definition but do not attempt to use automatic settings and therefore will connect more easily Use the MediaMVP-HD Setup menu to manually set MediaMVP-HD to HDMI video settings Start by using Composite video. You should see the MediaMVP-HD main menu on your HD TV set. Then use your Hauppauge remote control and go to Setup/VideoOutput and choose NTSC HDMI. N ote: Click the OK button on the remote control to enter each menu. You will see a list of HDMI video formats, from 480i to 1080p (the highest video format). Choose 480i and click the OK button on MediaMVP-HD. Now switch your HD TV set to the HDMI input which is connected to MediaMVP-HD. If you see video (the MediaMVP-HD HDMI Setup menu), you know that this format is supported by your TV set. Once you have found a format, try the next higher video format. Do this until you cannot 8 see a picture on your TV set using HDMI. Once the video fails to display, you have gone beyond the video format capacity of your HD TV and the MediaMVP-HD. Use the Composite display to go back one video format. [. . . ] To install an updated application, first, download the new application from the Hauppauge website: www. hauppauge. com/site/support/mediamvp-hd. html Next, unzip the new MediaMVP-HD application to a USB thumb drive. There are two files: mvphd. md5 and mvphd. The firmware update program requires that these two files be in the root directory on the USB thumb drive. Plug the USB thumb drive into the USB port on the front of MediaMVP-HD. [. . . ]