User manual HAUPPAUGE USB-LIVE2 QUICK INSTALLATION GUIDE

[. . . ] A blue screen will open and begin installing the drivers for your WinTV. Once the drivers have installed, click on the Finish bar to exit. Install the WinTV applications MovieFactory for making CD's and DVD's from your video recordings 2. How the USB-Live2 works Click the button labeled Step 2: Install WinTV The setup application will then open and begin automattically installing the WinTV application components. Once complete, click OK then Exit. ote: the latest driver updates are available at: www. hauppauge. com USB-Live2 is a Windows video capture device. [. . . ] NTSC is the broadcast format used in North America. WinTV v7 is always recording video to your PC's hard drive while TV is being displayed. In this way, you can immediately skip back and replay the video you are watching. Clicking on the Pause button will cause the video to pause, while clicking the Record button will cause the current video to be recorded to hard disk. Recorded video formats: . TS or . MPEG The default recording format is . TS (transport stream). These are MPEG-2 files but with a . TS file extension. If you have a video editing program which requires files of the type MPEG, click on the Settings menu, click the Advanced Options tab and set Auto convert to MPG. Your recordings will now be made in an MPEG-2 format with the file extension . MPG - To rewind the video to the beginning, click the Skip to the beginning button. If your video was paused, click the Play button. To rewind the video 1 minute, click the Skip back 1 minute button. If your video was paused, click the Play button. The Delay counter displays how much time you are behind the live video. For example, if the delay counter says 00:01:23, then the video window is showing video 1 minute and 23 seconds behind live video. Using the WinTV v7 application To video, click the Watch TV button. Options menu The Options menu is the main menu where you can select channels, turn on close captions, open the TV Scheduler, show Image capture To capture still images from video, click the `Snapshot' button. The configuration of the formats for still image capture is in the Capture settings. To configure, click the Settings menu button, then click on the Capture folder. You will see the settings for image capture under Snapshots. You can chose between BMP and JPEG formats. set for Record Weekly, you must also specify the Day of the Week for the recording. Date to Begin Program: today's date is the default. Change this if you want to schedule on another date. Source selection: leave set at WinTV to bring up the WinTV at the requested time and on the requested channel. clicking them while in the timeline bar. When you are finished adding videos, click Next and proceed to creating a DVD menu and then onto DVD burning. Recording videos with WinTV v7 for use in DVD MovieFactory Recordings made with the USB-Live2 in the WinTV v7 application are normally saved in the MyVideos directory, To change this directory, click the Settings menu and then the Folders tab. [. . . ] Uninstalling the WinTV driver and applications Run the hcwclear. exe from the installation CD. Select OK A black screen will briefly appear and once it has disappeared the software will be removed. If you now re-start the computer you will be at Step 4 of the installation. Jerky video with live video Jerky or distorted video can be caused by two things in your PC or laptop: a slow CPU which cannot decode the video signal fast enough, and a graphics system which cannot keep up with the video decode. Many times, improving the performance of the graphics display will fix the jerky video display. [. . . ]