User manual HAUPPAUGE WINTV HVR-1150 QUICK START GUIDE

[. . . ] WinTV-HVR-1150 Quick Installation Guide QI-WINTV-HVR1150-v3B · 1/12/2010 © Hauppauge Computer Works, Inc. 91 Cabot Court Hauppauge, NY 11788 Telephone: 631-434-1600 Fax: 631-434-3198 Tech Support: 631-434-3197 techsupport@hauppauge. com 3. Installing the WinTV-HVR-1150 board To install, switch off the computer and remove the computer cover. The manufacturer of your PC supplies instructions on removing the PC cover. N · · · ote: Your PC could be damaged by electrostatic discharge. [. . . ] Click the Scan button and WinTV will automatically scan for analog channels. The scanning process takes about 10 minutes. 6. Running WinTV for the first time To run the WinTV v7 application for watching TV, recording videos and playing them back on your PC, double click on the WinTV icon on your Windows desk top. External audio/video sources You can bring video into the WinTV from an external audio/video source such as a cable TV or satellite set top box. In the Device Setup Wizard, select External Inputs and click Next. You will be presented with the option to add a Composite and an S-Video Input. Please select your country (if not correct) and click Next. If you wish to connect a source not normally designed for operation in your country, you can configure the Video Format manually from the drop down list. Note: Pal BGHIDK is the commonly used format in Europe. NTSC is the broadcast format used in North America. Device Setup Wizard When you run WinTV for the first time, the WinTV Device Setup Wizard appears. Select the TV source that you are using. On some model WinTVs, you have multiple tuners and therefore you can select multiple sources. For the WinTV-HVR-1150, you can chose either ATSC or Digital QAM and Analog TV. You cannot chose both Digital ATSC and Digital QAM. ote: If you'd like to use the A/V inputs, please select External inputs (Composite/S-Video). N ATSC digital over-the-air TV Select Digital ATSC and click Next. In the ATSC Rescanning TV channels If you want to rescan for TV channels, click the Setup menu (the gear button in the lower left corner of WinTV v7). Choose your WinTV device by clicking on it, then click Tuner setup. Chose the TV format you want to scan, then click Next. Click Next and a new scan will be started. When the scan is complete, click Next / Next and OK. To turn on Closed captions, click on Show Captions. To manually schedule a TV recording, or to see which programs have been scheduled, click on Scheduler. To turn on the Always on Top mode, click on Stay on Top. Using the WinTV v7 application To watch TV, click the Watch TV button. To see the TV Channel list, click your right mouse button in the TV window to display the Options menu. You will see the channel list. Watch, Pause and Record TV WinTV v7 is always recording video to your PC's hard drive while TV is being displayed. [. . . ] In this case go back to settings and uncheck "use hardware acceleration" and rerun WinTV. Name: you can add a name to the recording. If you do not enter a name, the name will be in the channel/date format. Channel: chose one of your scanned channels. Start time: set to the desired start time. [. . . ]