User manual HAWKE 476 DATASHEET

[. . . ] Adaptors and Reducers Type 476 ATEX Adaptor Reducer Flameproof and Increased Safety Adaptor Reducer ADAPTOR AND REDUCER SELECTION TABLE Male Thread Metric M16 M20 M25 M32 M40 M50 M63 M75 ½" ¾" 1" NPT 1¼" 1½" 2" 2½" 3" M16 M20 M25 M32 M40 M50 Female Thread M63 M75 ½" ¾" 1" NPT 1¼" 1½" 2" 2½" 3" General Information All Metric entry threads are 1. 5mm pitch medium fit. Application/Features Provides a means of connection between the equipment and cable glands with dissimilar thread sizes or types. Materials & Finishes Hawke adaptors/reducers are manufactured as standard in brass. Technical Data Adaptor Ordering Example 476/Male Thread Size/Female Thread Size. [. . . ] Suitable for use in Gas Groups IIA, IIB and IIC. Construction and test standards EN 50014, EN 50018, EN 50019 and EN 50281-1-1. IEC 60079-0, IEC 60079-1 and IEC 60079-7. Reducer Ordering Example 476/1/Male Thread Size/Female Thread Size. 476/1/M25/¾" NPT. www. ehawke. com Smarter products To the best of our knowledge the information contained in this leaflet, is accurate at the time of going to print and the company reserves the right to improve or modify any product illustrated without notification. The company is unable to accept liability for any inaccuracies, errors or omissions that may exist. It is the customer's responsibility to ensure that the product is suitable for their application. All copyright reserved-Hubbell Ltd 2007. [. . . ] Copyright Condition: This document shall be used only for the purpose for which it is provided and no reproduction or publication of the document may be made and no article may be manufactured or assembled in accordance with information contained in the document without prior written consent of the owner. International HWK65 April '07 Adaptors and Reducers Metric [. . . ]