User manual HAWKING HAI6SD DOCUMENT

[. . . ] Further, this company reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes. LIMITED WARRANTY Hawking Technology guarantees that every HOWABN1Hi-Gain Wireless-300N Hi-Gain Outdoor Wireless-N Access Point/Bridge is free from physical defects in material and workmanship under normal use for one (1) year from the date of purchase. If the product proves defective during this one-year warranty period, call Hawking Customer Service in order to obtain a Return Authorization number. Warranty is for repair or replacement only. [. . . ] For detailed descriptions of the function, please refer to Section 2-4-1-1. Please select a channel number you wish to use. The channel number must be same with another wireless Hi-Gain Outdoor Wireless-N Access Point you wish to connect Click `Show Active Clients' button and a new popup window will appear which contains the information about all wireless clients connected to this Hi-Gain Outdoor Wireless-N Access Point. You can click `Refresh' button in popup window to keep information up-to-date. Please input the MAC address of the wireless Hi-Gain Outdoor Wireless-N Access Point you wish to connect 42 MAIN ESSID Multiple ESSID Channel Number Associated Clients MAC address 1-4 Set Security Click this button to select an encryption mode for this wireless link, a new popup window will appear. Please refer to Section 2-7 for detailed descriptions. After you finish with setting, please click `Apply', and the following message will be displayed: When you see this message, the settings you made are successfully saved. You can click `Go Back' button to back to previous page and continue on other setting items, or click `Apply' button to restart the wireless Hi-Gain Outdoor Wireless-N Access Point and the changes will take effect after about 30 seconds. 2-4-6 Universal Repeater In this mode, the Hi-Gain Outdoor Wireless-N Access Point can act as a wireless repeater. It will use the Bridging function to connect to the source access point and use the Access Point function to rebroadcast the signal. NOTE: For Repeater Mode, this Hi-Gain Outdoor Wireless-N Access Point will demodulate the received signal, checking if this signal is noise for the operating network then have the signal modulated and amplified again. The output power of this mode is the same as that of WDS and normal AP mode. 43 Here are descriptions of every setup item: Band Please select the wireless band you wish to use. By selecting different band setting, you'll be able to allow or deny the wireless client of a certain band. The detailed instructions are listed follow: Note: WPS function of this Hi-Gain Outdoor Wireless-N Access Point will not work for those wireless clients do not support WPS. 47 To use WPS function to set encrypted connection between this Hi-Gain Outdoor Wireless-N Access Point and WPS-enabled wireless client by WPS, click `WPS Setting' on the left of web management menu, and the following information will be displayed: 48 Here are descriptions of every setup item: Enable WPS Wi-Fi Protected Setup Information Check this box to enable or disable WPS function All information related to WPS will be displayed here, they're helpful when you're setting up connections by WPS. If data encryption settings of this Hi-Gain Outdoor Wireless-N Access Point has never been set, `unConfigured' message will be displayed her. (see Section 2-7 for detailed information); if data encryption settings has been set before, `Configured' message will be displayed here. Self PinCode: This is the WPS PIN code of this Hi-Gain Outdoor Wireless-N Access Point. This code is useful when you need to build wireless connection by WPS with other WPS-enabled wireless devices. SSID: Displays the SSID (ESSID) of this Hi-Gain Outdoor Wireless-N Access Point. Authentication Mode: The wireless security authentication mode of this Hi-Gain Outdoor Wireless-N Access Point will be displayed here. If you don't enable security function of the Hi-Gain Outdoor Wireless-N Access Point before WPS is activated, the Hi-Gain Outdoor Wireless-N Access Point will auto set the security to WPA (AES) and generate a set of passphrase key for WPS connection. Passphrase Key: Displays the WPA passphrase here, all characters will be replaced by asterisk for security reason. If encryption is not set on this Hi-Gain Outdoor Wireless-N Access Point, nothing 49 Config Mode Start PBC Start PIN will be displayed here. There are `Registrar' and `Enrollee' modes for the WPS connection. [. . . ] This is a convenient and efficient method for Hi-Gain Outdoor Wireless-N Access Points to route IP packets to their destination. ISP Gateway Address: (see ISP for definition). The ISP Gateway Address is an IP address for the Internet Hi-Gain Outdoor Wireless-N Access Point located at the ISP's office. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations. [. . . ]