User manual HAWKING HKS102 DOCUMENT

[. . . ] Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. VCCI Mark Warning LIMITED WARRANTY Hawking Technology guarantees that every HKS102 Mini 2-port KVM Switch is free from physical defects in material and workmanship under normal use for two (2) years from the date of purchase. If the product proves defective during this two-year warranty period, call Hawking Customer Service in order to obtain a Return Authorization number. [. . . ] It is a control unit that allows access to multiple computers from a single console (keyboard, monitor and mouse). With the 1. 5M built-in cables, it reduces the cabling troubles and enables users to access, control, boot and reboot two computers using only one keyboard, video and mouse. There is no better way to save time and money. By allowing a single console to manage all the attached PCs, the HKS102 eliminates the expense of purchasing a separate keyboard, monitor, and mouse for each PC, and saves all the extra space as well. It also eliminates the inconvenience and unnecessary effort involved in constantly moving around from one PC to another. Package Contents: One HKS102 2-port Mini KVM Switch Two Integrated KVM Cables (attached to the KVM Switch) One Quick Installation Guide Check to make sure that the unit was not damaged during shipping. If you encounter a problem, contact your dealer. Please read this manual thoroughly, and follow the installation and operation procedures carefully to prevent any damage to the HKS102 unit, and/or any of the devices connected to it. Pre-installation: Note: The default setting for the HKS102 Mini 2-port KVM Switch works with most systems. In fact, you do not have configure anything before installation. It is a plug and play device: Just connect the keyboard, the monitor, and the mouse to the KVM Switch. Then, connect the KVM cables to connectors on your computers. Finally, boot up the computer one at a time and you can start switching between the two computers. For a quick start on installation and operation, please follow the instructions below. Connect the shared keyboard, monitor, and mouse to the KVM Switch first, and then connect one set of built-in cable to the computers. Since the KVM Switch receives power from the computer's PS/2 interface, it is powered up when you connect the KVM cables to a PC. To set up your HKS102, please follow the steps below: Before connecting any cable to your KVM Switch, please make sure all of your computers and their peripherals have been powered off. Otherwise, the KVM Switch might not be set up properly. Step 1: Make sure all the computers that are to be connected to the KVM Switch and their peripherals are in powered-off state. If not, turn the power off before you proceed with the following steps. [. . . ] See Quick Reference Sheet. Keyboard Hotkeys A keyboard hotkey sequence consists of three specific keystrokes: See Quick Reference Sheet. Hotkey sequence = ScrLk + ScrLk + Command key The two consecutive ScrLk keystrokes should be pressed within 2 seconds and the following command key(s) should also be pressed within 2 seconds in likewise manner. Otherwise, the hotkey sequence will not be validated. [. . . ]