User manual HAWKING HNC230G

[. . . ] 1 Trademarks & Copyright Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976. FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Click "Record", and the "Record to Disk" window will appear. Assign the path and file name that you want to save to and click "Save". The viewer utility will then begin to record the video stream. If you want to stop recording, click "Stop". Note: Before manual recording, you will need to click on the camera button (see Section 7. 2 Camera Buttons) to select the camera that you would like to record video from. You will also need to make sure that the viewer is successfully connecting to the camera. Schedule Recording You can assign a schedule and let the viewer automatically record the video stream into video files. Please refer to Section 7. 8 to see how to set up recording schedules. The file name of the recorded video file is the start time of recording. For example, the file name "IPCamera_MJPEG_2004-10-823-56-40. avi" indicates that the video file began recording on 2004/10/8 23:56:40. 39 7. 6 Change Resolution The network camera supports two resolution formats: a. You can change the resolution of each connected network camera by clicking on the Resolution button. Note: Before changing the network camera's resolution, you have to select the camera by first clicking on its corresponding camera button. If you change the resolution of one of the cameras, other clients that are viewing the same camera simultaneously will also see the video with the changed resolution. Resolution VGA Changes the resolution to 640 x 480 (VGA) mode. CIF Changes the resolution to 320 x 240 (CIF) mode. 40 7. 7 View Four Cameras Simultaneously Clicking on the four-division button window. will allow you to view up to four cameras simultaneously in a four-division 41 7. 8 Viewer Utility Setting Click the Setting button . The camera's setting window will then appear. Note: When you want to change settings such as the IP Address, Video Port, etc. in the "Setting" option, you must first disconnect the camera by clicking the Stop button. 7. 8. 1 Setting Setting Name IP Address Video Port Model Username Password Discover It is not required that you fill in a camera name in order to connect to the camera. It is only for users to identify the camera. IP address/Domain name of the network camera. The number of the service port used by the network camera. (This camera only supports Motion JPEG). The user name for logging into the network camera. By default, the user name is "Admin". The password for logging into the network camera. [. . . ] This is so that you can open individual ports rather than a range of them. In the "Port Number" field, enter "Port 80 to Port 80" if you intend to you use the camera's default port settings (discussed earlier in this Appendix). If you do not intend to use the default settings, or if you will be using multiple cameras, you will need to enter a different port number (i. e. , 83, 84, etc. ). The "Port Number" field, for example, will then read "Port 83 to Port 83", etc. [. . . ]