User manual HAWKING HNC290G

[. . . ] 1 Trademarks & Copyright Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976. FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] If you change the resolution of one of the cameras, other clients that are viewing the same camera simultaneously will also see the video with the changed resolution. Resolution VGA Changes the resolution to 640 x 480 (VGA) mode. CIF Changes the resolution to 320 x 240 (CIF) mode. 43 7. 7 View Four Cameras Simultaneously Clicking on the four-division button window. will allow you to view up to four cameras simultaneously in a four-division 44 7. 8 Viewer Utility Setting Click the Setting button . The camera's setting window will then appear. Note: When you want to change settings such as the IP Address, Video Port, etc. in the "Setting" option, you must first disconnect the camera by clicking the Stop button. 7. 8. 1 Setting Setting Name It is not required that you fill in a camera name in order to connect to the camera. It is only for users to identify the camera. IP address/Domain name of the network camera. The number of the service port used by the network camera. (This camera only supports Motion JPEG). Check this box to enable motion-triggered recording. Whenever the camera detects motion, it will trigger a 30-second video recording. The user is not able to change the duration of this recording. The user name for logging into the network camera. By default, the user name is "Admin". The password for logging into the network camera. By default, the password is "1234". Click "Discover" and the camera's auto-discover window will appear. The window will show all the discovered cameras on the LAN environment for you to select. 45 IP Address Video Port Model Motion Record Username Password Discover 7. 8. 2 Recording You can set up the schedule for recording here. This utility will automatically record the video stream in the assigned file folder according to the schedule. The recorded video files will be in AVI format. The utility will only start to record the video stream when this utility is running and is successfully connecting to the camera at the beginning of the schedule. The schedule settings for one-time and weekly should not overlap, or the recording will fail. 46 One-Time Schedule Weekly Schedule Schedule Cycle Recording Select this item to enable cycle recording. When Cycle Recording is enabled and the storage usage has already reached the maximum reserve storage space, the utility will automatically delete the oldest recorded video file and use the space to store newly recorded video streams. [. . . ] This is so that you can open individual ports rather than a range of them. In the "Port Number" field, enter "Port 80 to Port 80" if you intend to you use the camera's default port settings (discussed earlier in this Appendix). If you do not intend to use the default settings, or if you will be using multiple cameras, you will need to enter a different port number (i. e. , 83, 84, etc. ). The "Port Number" field, for example, will then read "Port 83 to Port 83", etc. [. . . ]