User manual HELIX HXS 635 AVANTGARDE INSTALLATION

[. . . ] Check for a flat mounting surface, free from all obstruction. The method of installation chosen and level of execution will effect the overall performance of the speaker system. Treat each installation step with a high degree of attention. [. . . ] A plastic cup or some heavy gauge plastic sheeting may be needed in some locations that are exposed to moisture from behind the body panel. Care must be taken to prevent low frequency cancellation caused by air leakage between the front and rear of the speaker (such as when mounted on a curved or uneven surface, or when mounted in an oversized hole). General information This manual has been designed to make HELIX PRECISION automotive loudspeaker installation and ownership as trouble-free as possible. Please read through this manual completely before attempting any installation steps and familiarize yourself with your new speaker system. You will need your purchase receipt as proof of purchase for any and all warranty repairs and for insurance purposes. Keep your receipt, owner's manual, and packing materials in a safe location for possible future use. Pre-installation instructions It is recommended that you have your new HELIX PRECISION automotive loudspeakers professionally installed by your authorized HELIX dealer. This will ensure the use of proper installation techniques and materials, and will save much time and effort. If you choose to perform your own installation read the following information and precautions carefully. Position the loudspeaker assembly into the mounting hole and confirm correct mounting screw hole location. Proceed to insert mounting screws through the loudspeaker mounting assembly and use the provided screw clips to capture the screw. Place the speaker grille within the basket and mounting ring and make sure the grille makes contact with the grille mounting adhesive. Main features P 236 PRECISION 25 mm soft dome tweeter with neodyme magnet 165 mm mid/bass with special sisal cone special rubber edge surround for high loadability and long service life high-quality, stable metal basket for reducing resonance Euro-DIN basket for easy installation in virtually any vehicle type solid grille for effective speaker protection P 235 PRECISION 25 mm soft dome tweeter with neodyme magnet 130 mm mid/bass with special sisal cone special rubber edge surround for high loadability and long service life high-quality, stable metal basket for reducing resonance Euro-DIN basket for easy installation in virtually any vehicle type solid grille for effective speaker protection P 234 PRECISION 25 mm soft dome tweeter with neodyme magnet 100 mm mid/bass with special sisal cone special rubber edge surround for high loadability and long service life high-quality, stable metal basket for reducing resonance Euro-DIN basket for easy installation in virtually any vehicle type solid grille for effective speaker protection Flexible 2-way frequency crossover with - tweeter level adjustment -3 / 0 / +3 dB with gold plated repositionable jumpers - 4 ohm / 2 ohm switchable for the operation of two woofer systems - integrated tweeter protection Woofer installation 8 english Tweeter installation Flush mount counterclockwise Surface mount counterclockwise Angle mount counterclockwise Crossover connection to amplifier tweeter mid/bass speaker 9 english Dimensions P 236 P 235 P 234 10 english Technical data P 236 Power RMS/Max Frequency range Sensitivity Impedance Mounting depth 60/80 Watts P 235 50/70 Watts P 234 40/60 Watts 2, 5 - 21 kHz 94 db 1W/1m 4 Ohms P1 45 Hz - 21 kHz 65 Hz - 21 kHz 85 Hz - 21 kHz 90 db 1W/1m 4 Ohms 65 mm 90 db 1W/1m 4 Ohms 60 mm 89 db 1W/1m 4 Ohms 48 mm Warranty regulations Due to the high quality standard HELIX products achieved an excellent international reputation. Therefore we grant a warranty period of 2 years. The products are carefully checked and tested during the entire production process. In the case of service note the following: 1) The 2 years warranty period commences with the purchase of the product and is applicable only to the original buyer. 2) During the warranty period we will rectify any defects due to faulty material or workmanship by replacing or reparing the defective part at our decision. Further claims, and in particular those for price reduction, cancellation of sale, compensation for damages or subsequential damages, are excluded. The warranty period is not altered by the fact that we have carried out warranty work. [. . . ] 3) Unauthorized tampering with the product will invalidate this warranty. 4) Consult your authorized dealer first, if warranty service is needed. Should it be necessary to return the product to the factory, please insure that a) the product is packed in original factory packing in good condition b) the product is shipped prepaid, i. e. [. . . ]