User manual HERCULES DETXP

[. . . ] Drivers for Windows Detonator XP User's Guide Driver Version 21. 83 NVIDIA Corporation October 11, 2001 Published by NVIDIA Corporation 2701 San Tomas Expressway Santa Clara, CA 95050 Copyright © 2001 NVIDIA Corporation. This software may not, in whole or in part, be copied through any means, mechanical, electromechanical, or otherwise, without the express permission of NVIDIA Corporation. Information furnished is believed to be accurate and reliable. However, NVIDIA assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties, which may result from its use. [. . . ] Note: Refer to the Windows XP online Help and documentation for further information on using these settings. · The monitor icons area displays a monitor icon for each monitor attached to your computer. If you are using just one monitor, that monitor shows the relative size of items on your desktop, based on your current screen resolution. If you have more than one monitor installed, right-click a monitor icon, and click Identify to see a number appear on the monitor corresponding to the icon you clicked. The settings for that monitor appear in Display, Colors, and Screen Area. If more than one icon is displayed, drag them to the positions that represent how you want to move items between monitors. For example, if you are using two monitors and you want to move items from one monitor to the other by dragging left and right, position the icons side by side. To move items between monitors by dragging up and down, position the icons one above the other. The icon positions don't have to correspond to the physical positions of your monitors. You can position the icons one above the other even though your monitors are side by side. · The Display window displays all installed video adapters. If you are using more than one monitor, the adapter for your primary monitor is in position 1. · Screen resolution displays the current screen resolution settings for the monitor whose video adapter appears in the Display window. Drag the slider to specify the screen resolution you want. As you increase the number of pixels, you display more information on your screen, but the information decreases in size. · Color quality displays the current color settings for the monitor attached to the video adapter that appears in the Display window. To use a different color settings, click the arrow, and then click a setting. · Use this device as the primary monitor, when checked, specifies that the monitor corresponding to the icon you selected above is the primary monitor. The primary monitor will display the logon dialog box when you start your computer. In addition, most programs will display windows on the primary monitor when you initially open them. Note: On a laptop computer, the primary display is always the LCD display screen. NVIDIA Corporation 51 CHAPTER 6 TwinView Basics: Windows XP/2000/NT 4. 0 · Extend my Windows desktop onto this monitor, when checked, specifies that your desktop will be extended onto the monitor corresponding to the monitor icon you selected. This check box is unavailable for your primary monitor because additional monitors are all extensions of the primary monitor. NVIDIA Panels With DualView Enabled Click the Advanced button (Figure 6. 6) to display the General page with several NVIDIA tabs but without the TwinView tab, as shown in Figure 6. 7. For details on using the Device Selection panel, see "Accessing the Device Selection Control Panel" on page 79. [. . . ] Note: It is recommended that you leave this option unchecked unless you experience problems with video playback, such as image corruption or no video image at all. · Brightness, Contrast, Hue, and Saturation: You can independently control the brightness, contrast, hue, and saturation to achieve optimal image quality when playing back videos or DVD movies on your computer. · Enable video overlay zoom: Click this option, then click Apply to use the Zoom control to zoom in (out) on a specific area of the video output (overlay) on your screen. Using the diagram of the screen regions shown on the Overlay Controls panel, you can select the area of the video screen you would like to zoom. [. . . ]