Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HERKULES 10792. We hope that this HERKULES 10792 user guide will be useful to you.
Lastmanuals help download the user guide HERKULES 10792.
Detailed instructions for use are in the User's Guide.
[. . . ] Part# 1001483 6-21-01 TN
TM
Equipment Corporation
Manufacturing Systems and Equipment for the Automotive and Industrial Markets
CRUSHING
CURING
HANDLING
LIFTING
WASHING
VACUUMING
This manual contains important information concerning the installation and operation of the equipment listed below. Read manual INSTRUCTIONS thoroughly and keep for future reference.
Herkules Equipment Corporation 248-960-7100
2760 Ridgeway Court 1-800-444-4351
Walled Lake, MI 48390-1662 USA Fax 248-960-7109
Item 1A. [. . . ] Note the position of the suction and discharge valves before removing them from the pump body. The first diaphragm is removed from the pump shaft by unscrewing in a counter clockwise direction. The second diaphragm is removed by the flat tip of a screwdriver into he exposed slot at the end of the shaft and unscrewing the diaphragm from the shaft. To remove the flange housing, place the tip of a flat bladed screwdriver into the air bleed hole on the lower side of the flange housing and lift up the lower end separating the flange housing from the pump body. The slide valve assembly and the pump shaft can be removed by simply pulling them from the pump body. The pump shaft then can be removed from the slide valve yoke assembly.
Reassemble Procedure
Assemble the slide valve and the pump shaft with the yoke placed between the two bumpers on the pump shaft. Install the slide valve/pump shaft assembly into the pump body making sure the o-rings in the slide valve are in place. To install the flange housing, prelube the o-ring with Parker Super "O" Lube and install on flange housing and place housing over the pump body aligning the flange housing with the pump body ribs pressing it into place. Install the first diaphragm and o-ring onto the pump shaft threading it onto the shaft using a flat blade screwdriver to hold the pump shaft until the diaphragm is tight. Install the second diaphragm and o-ring onto he pump shaft turning clockwise until tight. [. . . ] Install the muffler in the center port by pushing it in and sliding the retaining clip into place. Install the suction and discharge and the air in port fitting and slide the retaining clips into place. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HERKULES 10792
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HERKULES 10792 will begin.
