User manual HILTI CP777 INSTALLATION

[. . . ] 0nce the theft protection system code has been set (the CP777 module forms an integral part of the electric tool), the t00l can be operated only when the user is in possessron of an electronic activation key. - Built-in module - Company card - 2. 2 The lollowing ilems are supplied as $landatd: in the electric tool CP777-K activation key 2. 1 Indicator lamp - - Indicates that the theft protection system is in operation (blinks yellow). 2. 3 Company remote (optional) For convenient activation of tools equipped with the CP777 system and for programming activation keys. (See operating instructions for company remote. ) -NOTE. When nc CP777 theft protection code has been set, the electric tool is ready for use immediateiy after plugging the supply cord into the power ouilet, -NOTE- 3. 3 Using the company card and eledric lool to program additional activali0n keys E Same procedure as described at 3. 2. 3. 4 Activating the electric tool 4 Duplicates of a company card can be produced by Hilti 0n requesr. [. . . ] Duplicates can be produced only by making a copy from an existing company card or an activated electric tool. 3. 1 Using the company card t0 sel the CP777 code 1. Plug the electric tool supply cord into the power outlet. Hold the activation key against the lock symbol on the electric tool (position of the lock symbol is shown in El the operating instructions for the tool). The yellow lamp no longer lights and the electric tool is then ready T0r use. 1. Plug the electric tool supply cord into the power outlet. 2. Hold the company card against the lock symbol on the electric tool (position of the lock symbol is shown in the operating instructions for the tool) within one minute. Remove the company card from the lock symbol. The yellow lamp no longer lights and the CP777 code is cancelled. C0mplete the CP777 code canceling operation by disconnecting the supply cord from the power outlet. the operating instructions for the tool). The yellow lamp then lights constantly for 1 second before continuing to blink rapidly, 5. Remove the activati0n key f rom the lock symbol. Repeat steps 4 and 5 for each activation key to be programmed. Complete the code setting 0perati0n by disconnecting the supply cord from the power outlet. 4. 'l Care ollhe company card and aclivation key The 0uter casings of the company card and actrvation key are made from impact resistant plastic. Clean the exterior of these items at regular intervals with a damp cloth. (This may negatively affect functionality of the company card and activation key. [. . . ] (This may negatively affect functionality of the company card and activation key. lt has no effect, however, on the electrical safety of the theft protection system. ) The company card and activation key may not be disposed of together w th househo d or genera u/aste material. Hilti warrants that the product supplied is free of defects in material and workmanship. This warranty is valid as long as the product is operated and handled correctly, cleaned and serviced properly and in accordance with the Hilti operating instructions, all warranty claims are made within 12 months (unless other mandatory national regulations prescribe a longer minimum period) from the date of sale (invoice date) and the technical system Additional claims are excluded, unless mandatory national regulalions prohibit such exclusion. [. . . ]