User manual HILTI PR20

[. . . ] PR 20 en Operating instructions *282843* 282843 X+ x y+ y+ YX- Y+ x- x+ yx- y+ 2 1 3 5 214 213 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 113 112 111 110 109 108 107 106 x+ yx- y+ 1 4 3 2 180° PR 20 rotating laser It is essential that the operating instructions are read before the tool is used the first time. Always keep these operating instructions together with the tool. Ensure that the operating instructions are with the tool when it is given to other persons. Contents Contents Page 1. . 12 Component parts PR 20 rotating laser Laser beam (plane of rotation) Rotating head Control panel Grip Battery compartment Base plate with 5/8" thread PR 20 control panel On / off button Shock warning deactivation key Servo key (sets X/Y inclination / direction) Auto leveling LED Shock warning deactivation LED Battery LED X-inclination / direction LED Y-inclination / direction LED 1 1. [. . . ] ­ If mounting on an adaptor, ensure that 6 6. Getting started Shock warning LED All LED's blink. The tool has been bumped or brought out of level temporarily. The shock warning LED lights red after deactivation of the shock warning. Inclination LED The X and Y LEDs do not light. The X LED does not light and The Y LED lights red Manual operation: Y-direction can be aligned manually by way of the servo keys. X­direction is still under automatic control. The X LED lights red and The Y LED does not light Manual operation: X direction can be aligned manually by way of the servo keys. Y axis is still under automatic control. The X LED lights red and The Y LED lights red Manual operation: X and Y directions can be aligned manually by way of the servo keys. The shock warning system is deactivated. 6. 3 Inserting new batteries 1. Open the battery compartment by turning the locking button. 2. Insert the batteries in the battery compartment. 3. Close the battery compartment by turning the locking button. 7 -NOTEThe tool may be powered only by the PRA 801 battery pack or by batteries manufactured according to the IEC standard. PR 801 battery pack ­ The performance of the battery pack drops at low temperatures. ­ Store the battery pack at room temperature. ­ Never store the battery pack where it is exposed to direct sunlight, on a radiator or heater, or behind glass (windows, motor vehicle windscreens, etc). Batteries ­ Do not use damaged batteries. Do not mix batteries of different types or batteries from various manufacturers. 6. 1 Switching on the tool Press the ON / OFF key. -NOTEAfter switching on, the tool begins to level itself automatically. 6. 2 LED indicators Auto leveling LED The LED blinks rapidly. [. . . ] Warranty Hilti warrants that the product supplied is free of defects in material and workmanship. This warranty is valid as long as the product is operated and handled correctly, cleaned and serviced properly and in accordance with the Hilti operating instructions, all warranty claims are made within 12 months from the date of the sale (invoice date), and the technical system is maintained. This means that only original Hilti consumables, components and spare parts may be used in the product. This warranty provides the free-of-charge repair or replacement of defective parts only. [. . . ]