User manual HILTI PR26

[. . . ] PR 26 Bedienungsanleitung Operating instructions Mode d'emploi Istruzioni d'uso Gebruiksaanwijzing Manual de instruções Manual de instrucciones Brugsanvisning Käyttöohje Bruksanvisning Bruksanvisning Instrukcja obslugi de en fr it nl pt es da fi no sv pl ru 1 x+ yx- y+ X+ YXY+ 2 x+ yx- y+ 3 4 Y- X+ X- Y+ 5 20 m YX+ X- Y+ 20 m 180° 6 B 10 m [30 feet] A 20 m f [ 60 ] eet 7 X+ R X- YX+ X- Y+ R ma x. 1 . 5 m m[ 1/1 C B 6"] A Y+ Y- PR 26 rotating laser It is essential that the operating instructions are read before the tool is used the first time. Always keep these operating instructions together with the tool. Ensure that the operating instructions are with the tool when it is given to other persons. Component parts PR 26 rotating laser Laser beam (plane of rotation) Rotating head Control panel Grip Battery compartment Base plate with 5/8 thread Control panel On/off button Shock warning deactivation key Rotation speed control key Line function key Direction keys (left/right) Servo keys (set X/Y inclination/direction) Auto leveling LED Shock warning deactivation LED Battery LED X-inclination/direction LED Y-inclination/direction LED PRA 26 laser receiver Contents 1. [. . . ] -NOTE*In order to obtaine the specified accuracy, the tool should be stood on an approximately level surface. -NOTEThe X LED does not light (the X-direction is brought into vertical alignment automatically and monitored). The Y LED lights red (the Y-direction can be aligned manually by way of the servo keys, the laser plane remains perpendicular). 7. 2. 5 Automatic alignment A basic prerequisite for auto alignment is that the PR 26 is set up accurately. The PR 26 must be set up so that the correct axis (X or Y) is positioned in the direction in which alignment is to be performed. This can only be done in conjunction with the PRA 26. Procedure: ­ Position the PR 26 at the reference point and with the correct axis in the direction in which alignment is to be performed (the operating range for auto alignment is a radius of 5-50 m). ­ Position the PRA 26 laser receiver at the desired point. ­ Check that no obstacles prevent communication between the PR 26 and the PRA 26. ­ Activate the auto alignment function by pressing the X or Y key three times within one second. It is important that the axes correspond correctly, i. e. when X (Y) is to be aligned with the reference point, auto alignment of the X (Y) axis must be enabled by way of the PRA 26. ­ As long as the PR 26 is not in line laser mode, it then switches automatically to medium rotation speed and begins the search process. The auto align function is indicated in the display by the axis currently being aligned and by blinking arrows. An audible signal is emitted continuously during the search process. ­ The direction of the search process can be changed by pressing the direction arrows. ­ The beam moves to the zero point (reference plane) as soon as the laser beam strikes the detection area on the PRA 26 laser receiver. ­ After reaching this point (finding the reference plane), a signal sounds briefly indicating that the process is complete. Only the axis that has been aligned is then shown in the display. If the process cannot be completed within a certain period of time, an error is indicated in the display. -NOTE- If an error is displayed Please check that the PRA 26 is positioned within the inclination range (10°) and that no obstacles are located between the rotating laser and the laser receiver. 7. 2. 6 Manual alignment with the PR 26 A basic prerequisite for manual alignment is that the PR 26 is set up accurately. The PR 26 must be set up so that the correct axis (X or Y) is positioned in the direction in which alignment is to be performed. [. . . ] This means that only original Hilti consumables, components and spare parts may be used in the tool. This warranty provides the free-of-charge repair or replacement of defective parts only over the entire lifespan of the tool. Parts requiring repair or replacement as a result of normal wear and tear are not covered by this warranty. Additional claims are excluded, unless stringent national rules prohibit such exclusion. [. . . ]