User manual HILTI SD4500

[. . . ] SD 4500 / SD 2500 Operating instructions Mode d'emploi Manual de instrucciones Manual de instruções en fr es pt 285702 *285702* 1 1 3 2 4 5 6 7 10 13 12 11 8 9 SMI 55 plus 2 2 3 1 3 1 3 2 4 5 2 6 1 2 7 1 2 1 2 Click 8 1 4 3 2 8 1 4 3 2 9 SD 4500 / SD 2500 drywall screwdrivers It is essential that the operating instructions are read before the tool is operated for the first time. Always keep these operating instructions with the tool. Ensure that the operating instructions are with the tool when it is given to other persons. Operating controls and parts 1/4 chuck (for bit holder, magazine bit) Adjustable depth gauge (with bit change function) Tool / accessory interface (click connection) Coupling system / gearing Motor Belt hook Motor cooling air intake Lockbutton for sustained operation Supply cord On / off switch (with electronic speed control) Forward / reverse switch Type plate Cooling air exit with controlled air flow 1. General information 1. 1 Safety notices and their meaning -CAUTIONDraws attention to a potentially dangerous situation that could lead to minor personal injury or damage to the equipment or other property. [. . . ] Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 5. 1. 4 Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. 1. 5 Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. en 5. 2 Specific safety rules a) Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. -WARNINGTo reduce the risk of injury, user must read instruction manual. en 6. [. . . ] This may negatively affect the electrical safety of the power tool. Always keep the grip surfaces of the power tool free from oil and grease. Do not use cleaning agents which contain silicone. 8. 3 Maintenance Check all external parts of the power tool for damage at regular intervals and check that all controls operate faultlessly. [. . . ]