User manual HILTI SF144-A

[. . . ] SF 144-A / SFH 144-A Bedienungsanleitung Operating instructions Mode d'emploi Manual de instrucciones Istruzioni d'uso Gebruiksaanwijzing Brugsanvisning Bruksanvisning Bruksanvisning Käyttöohje Manual de instruções Lietoßanas pamåcîba Instrukcija Kasutusjuhend de en fr es it nl da no sv fi pt el lv lt et 1 1 2 3 6 5 7 4 9 8 + 2 14. 4 Volt Li-Ion 2. 6 Ah 3 L R 4 2 5 1 3 1 6 7 1 2 3 14. 4 Volt Li-Ion 2. 6 Ah SF 144A / SFH 144A cordless drill/driver / cordless hammer drill/driver It is essential that the operating instructions are read before the power tool is operated for the first time. Always keep these operating instructions together with the power tool. Ensure that the operating instructions are with the power tool when it is given to other persons. Contents 1. Manufacturer's warranty - tools 12. [. . . ] 6. 3 Fitting the battery CAUTION Before fitting the battery, check that the power tool is switched off and that the transport lock is engaged (forward/reverse switch in the middle position). Use only the Hilti batteries approved for use with this power tool. CAUTION Check that the terminals on the battery and in the power tool are free from foreign objects before inserting the battery in the power tool. Push the battery into the power tool from below as far as it will go and until it is heard to engage with a click. CAUTION A falling battery may present a risk of injury to yourself or others. Check that the battery is seated securely in the power tool. Pull the battery downwards out of the power tool. en 6. 1 Battery use and care NOTE Battery performance drops at low temperatures. Never use the battery until the cells become fully discharged. Change to the second battery as soon as a drop in performance is noticed. Recharge the battery immediately so that it is ready for reuse. Never store the battery where it is exposed to direct sunlight or sources of heat, e. g. on heaters / radiators or behind a motor vehicle windscreen. Batteries that have reached the end of their life must be disposed of safely and correctly to avoid environmental pollution. 6. 2 Charging the battery DANGER Use only the Hilti batteries and Hilti chargers listed under "Accessories". 6. 2. 1 Charging a new battery for the first time A new battery must be charged correctly for the first time before use. This will ensure that the cells form correctly. Incorrect initial charging may have a permanent, negative effect on battery capacity. Please refer to the applicable battery charger's operating instructions for information about initial charging. 7. Operation CAUTION The power tool may suddenly swing to the side (rotate about its own axis) when drilling, hammer drilling or screwdriving. Always use the power tool with the side handle fitted and hold it securely with both hands. CAUTION The tool may get hot during use. Wear protective gloves. 22 CAUTION To avoid injuries caused by the insert tool, wear protective gloves when changing insert tools. 7. 1 Setting forward or reverse rotation 3 NOTE The forward / reverse switch is used to select the direction of rotation of the drive spindle. [. . . ] Batteries may explode if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or environmental pollution. Careless disposal may permit unauthorized and improper use of the equipment. This may result in serious personal injury, injury to third parties and pollution of the environment. CAUTION Dispose of defective batteries without delay. [. . . ]